Somerset · England
Bath & shower resealing (mastic) in Yenston, Somerset
Our repair technicians come to Yenston for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Gaps by the taps
- Stained silicone
- Mould you cannot clean out
How we handle bath resealing in Yenston
Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. If you are dealing with damp near the bath and a messy previous reseal, we can generally put it right.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Yenston (BA8)
- Region
- Somerset
- Cover
- A year, on every repair
- Quotes
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath resealing costs
Prices are worked out job by job. What matters most is:
- What the surface is made of
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- Your postcode, so we can check dates
To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Give the seal a regular clean
- Wipe the joints dry after use
- Run the extractor fan during and after showers
- Let steam out after showers
Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take a couple of hours, including clearing up.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Make sure the area is dry
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Questions from Yenston
Do you come to Yenston?
Yes. We work across the UK and travel to Yenston and the rest of Somerset. Send photos and we’ll quote, or call 0345 017 0787.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
When can I use the bath after resealing?
Generally after around 24 hours. We confirm before we leave.
Why does the silicone keep cracking?
Movement is the usual cause. We fill the bath before sealing it.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Somerset.
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Can new silicone go over old?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Covering Yenston
Yenston is about 11 miles east of Yeovil, in Somerset. Clients in Yenston get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We cover 640 places in Somerset, from the larger towns to small villages.
We cover every part of BA8. We regularly work on streets such as High Street, Sally Lovell's Lane and Whitchurch Lane. We also travel to Templecombe (1 mile north-west), Henstridge Bowden (2 miles west), Purse Caundle (3 miles south-west), Milborne Port (3 miles south-west) and Milborne Wick (3 miles west). Within a short drive, we also cover Yeovil (11 miles west), Shepton Mallet (15 miles north-west), Wincanton (5 miles north), Somerton (15 miles west), Castle Cary (9 miles north-west) and Preston Plucknett (12 miles west).
What’s near Yenston
Our clients here include homes close to Virgina Ash Hotel, Church of St Mary and St Nicholas CofE Primary School, among other places. Yenston’s nearest station is Templecombe station, roughly 0.9 miles north-west. Further afield, we also cover the area around Sherborne Old Castle (5 miles south-west).
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Gaps too big for silicone alone
- Tiles that move, until they’re refixed
- A bath or tray that moves, until its support is fixed
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Yenston
- Wet rooms
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
Places near Yenston
What else we do in Yenston
Resealing in Yenston: why it matters
Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Yenston customers choose us
- No extra charge for your area
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Most jobs done in one visit
Take a look at our full price list.
Landlord and trade work in Yenston
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Yenston use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Signs you need bath resealing in Yenston
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
If you can see any of these, send us a picture:
- Water getting behind the bath or tray
- Black mould in the sealant
- Missing sealant behind the taps
- A messy previous reseal
Before booking anyone
- How long the guarantee is and what it covers
- When it can be used again
- What happens if the damage is worse than the photos show
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
