Somerset · England
Bath Resealing for Thornfalcon homes
Bath resealing for Thornfalcon, without a refit. Get a fixed price from your photos, then book a visit.
- Black mould in the sealant
- An untidy old seal
- Water getting behind the bath or tray
How we handle bath resealing in Thornfalcon
A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why so many DIY reseals peel. Our repair technicians work on basins & vanity units, wet rooms and baths, and people most often call us about silicone smeared on tiles and leaks at the edges.
Big or small, it’s backed by a one-year guarantee in Thornfalcon and across Somerset.
- Location
- Thornfalcon (TA3)
- Area hub
- Somerset
- Warranty
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a couple of hours, and the room is left clean and tidy.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
Ask for a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Towns and villages near Thornfalcon
More services for Thornfalcon
About Thornfalcon
Thornfalcon is about 3 miles east of Taunton, in Somerset. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 640 towns and villages in Somerset.
Every address in TA3 is within our area. Neighbouring places we cover include Henlade (1 mile west), Ruishton (1 mile north-west), Creech St Michael (1 mile north-west), Charlton (2 miles north) and Creech Heathfield (2 miles north). Larger places within reach include Taunton (3 miles west), Bridgwater (8 miles north), Chard (10 miles south), Wellington (9 miles west), Street (15 miles north-east) and Crewkerne (13 miles south-east).
Landmarks near Thornfalcon
We visit homes around Heathfield Community School, Church of the Holy Cross and Ruishton Church of England School and the streets around them. Thornfalcon’s nearest station is Taunton station, roughly 3.5 miles west. Other landmarks nearby include Musgrove Park Hospital (4.2 miles west) and Somerset Cricket Museum (3.3 miles west). Open spaces near Thornfalcon include Swell Wood RSPB Nature Reserve.
Work for landlords and builders
For anyone letting property in or around Thornfalcon, we will quote for several properties at once. Send pictures for each one and we will price them together.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Most jobs done in one visit
- Same prices wherever you are
- Every repair guaranteed for a year
- A fixed quote before booking
Read our full price list.
When a repair isn’t the answer
In fairness, some problems need a different fix:
- Movement in the bath or tray
- Loose tiles, which need refixing first
- Very wide gaps that need a trim
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Thornfalcon
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
How we price bath resealing
Prices are worked out job by job, from your photos. The main factors are:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The colour and finish to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- What it’s made of, if you know
- A close-up of the damage, in focus
- Something in shot to show the size
- A wider photo showing the entire bath or shower
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say immediately if a repair is the right fix.
Common questions in Thornfalcon
My seal keeps tearing. Why?
Normally because the bath or tray moves. We fill the bath before sealing it.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you come to Thornfalcon?
Yes, we do. Technicians travel to Thornfalcon from across the region, and the price is the same as everywhere else.
Why does my sealant keep going mouldy?
Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Repairs by material
Shower trays
We put weight on a tray before sealing it, for the same reason.
Baths
We fill the bath before sealing, to open the joint fully.
What we are called out for in Thornfalcon
Poor ventilation speeds things up: damp hangs around, and mould takes hold.
People normally call us when they notice something like this:
- Stained silicone
- Black spots in the silicone
- Silicone coming away from the tiles
- Missing sealant behind the taps
Comparing quotes
- Who turns up on the day
- What prep work is covered
- How soon you can use it again
- A fixed price, and whether VAT is included
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Run the extractor fan during and after showers
- Wipe the joints dry after use
- Clean the sealant gently and regularly
- Let steam out after showers
Leave the sealant to cure for the time we give you, normally around 24 hours.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.
About our accreditations · Every repair comes with a one-year guarantee.
