Coventry · England
Bath Resealing in Toll Bar End
Our repair technicians come to Toll Bar End for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Gaps in the seal
- Discoloured, yellow sealant
- Missing sealant behind the taps

About our bath resealing in Toll Bar End
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Typical jobs include water getting behind the bath or tray and missing sealant behind the taps, across shower trays & enclosures, kitchen worktops & sinks and wet rooms.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Toll Bar End (CV3, CV1, CV4)
- Region
- Coventry
- Cover
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026

Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- Most jobs done in one visit
- Rooms protected and left tidy
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
See our prices page.
Also near Toll Bar End
Also in Toll Bar End
Looking after it afterwards
It’s all simple stuff:
- Air the room after use
- Ventilate the bathroom well
- Keep the joints dry
- Reseal at the first sign of lifting
Let it cure fully before using the bath or shower, normally about a day.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.
Toll Bar End: your questions answered
Do you work in Toll Bar End?
Yes. We cover the entire UK and travel to Toll Bar End. Send pictures and we will quote, or call 0345 017 0787.
How long does silicone take to cure?
Normally after around 24 hours. We confirm before we leave.
Why does my sealant keep splitting?
Normally because the bath or tray moves. We seal baths full of water.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Can you reseal over the old silicone?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
How do I stop mould in sealant?
Generally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Toll Bar End, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
When to call us in Toll Bar End
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
Common reasons people in Toll Bar End contact us are:
- Mould you cannot clean out
- An untidy old seal
- Damp near the bath
- Silicone coming away from the tiles
Before you book anyone
- The length of the guarantee and what it covers
- How changes to the job are handled
- What aftercare is recommended
- How soon you can use it again
Toll Bar End and nearby
Toll Bar End is about 3 miles south-east of Coventry, in Coventry. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 88 towns and villages in Coventry, from the larger towns to small villages. We work right across the region, from Toll Bar End to Birmingham (19 miles away).
All of CV3, CV1 and CV4 is within our area. From Sibree Road, Brandon Lane and Chace Avenue or a nearby road, a technician can come to you. If you are just outside Toll Bar End, we cover Willenhall (1 mile north), Ernesford Grange (1 mile north), Stoke Aldermoor (1 mile north), Baginton (1 mile south-west) and Binley (1 mile north-east). Within a short drive, we also cover Coventry (3 miles north-west), Hillfields (3 miles north-west), Bishopsgate Green (3 miles north-west), Radford (3 miles north-west), Foleshill (4 miles north) and Wood End (4 miles north).
Local landmarks in Toll Bar End
Locally, our jobs take us to homes close to Whitley Academy, Stretton Church of England Academy and Church of St John the Divine and the streets around them. Toll Bar End’s nearest station is Coventry station, about 2.5 miles north-west. Nearby you will also find Aircraft Radio Museum (0.9 miles south) and Baginton Castle (1.5 miles south-west). Not far away are Brandon Marsh.
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, for the same reason.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Honest limits
A repair isn’t right for every job, for example:
- A bath or tray that moves, until its support is fixed
- Hidden water damage
- Gaps too big for silicone alone
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
- Wet rooms
- Baths
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes around two hours. If we find something your photos didn’t show, we will explain it before carrying on.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Getting ready for the visit
- Ensure the area is dry
- Let us know which floor the room is on
- Ensure the room can be ventilated
Getting a price
Send us a photo of the damage and one of the entire item, and tell us you’re in Toll Bar End, and we will come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.

