Cardiff · Wales

Bath & shower resealing (mastic) in Victoria Park, Cardiff

Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Victoria Park. Send photos for a free, fixed quote.

  • Unsealed corners
  • Silicone coming away from the tiles
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Victoria Park

About our bath resealing in Victoria Park

We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. Most jobs take a couple of hours. Whether it’s old sealant that looks dirty and mould you can’t clean out, we can help.

Every repair is covered by a one-year guarantee.

Area
Victoria Park (CF5, CF11)
Region
Cardiff
Guarantee
One year on every repair
Quotes
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

What we cannot put right

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Rotten walls or floors behind the bath
  • Gaps so wide they need filling or trims before sealing
  • Hollow or loose tiles

If in doubt, send pictures and we’ll say what we think before booking.

Materials we work on in Victoria Park

  • Wet rooms
  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units
  • Shower trays & enclosures

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

Looking after it afterwards

To keep it looking its best:

  • Wipe the joints dry after use
  • Reseal at the first sign of lifting
  • Store bottles on a shelf
  • Air the room after use

Good ventilation is the best protection, and dry the joints after bathing to keep mould away.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

Common questions in Victoria Park

How do I stop mould in sealant?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before and we will plan for it.

What information do you need?

Just photos, your postcode and a contact number. On the day, access to the room.

Can I add another job to the visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

What does bath resealing cost?

Because every job differs, we price from pictures. You will get a fixed figure before booking.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote with dates.

Is there any odour?

There may be a mild smell during the work.

Is resealing worth it?

Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.

Why choose Surface Doctor in Victoria Park

  • Every repair guaranteed for a year
  • Repair technicians who travel to you, UK-wide
  • Dust sheets down, tidy finish
  • Most jobs done in one visit

Take a look at our prices page.

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.

What happens on the day

On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to around two hours.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Before we arrive

  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible
  • Clear toiletries, mats and anything else from around the area

How to get a price

For a price in Victoria Park, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Read more

How we price bath resealing

We charge the same across the UK, including Victoria Park. The price reflects:

  • How much damage there is
  • Access to the area
  • Doing more than one item at once
  • The type of damage

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Quotes from your photos

It only takes a minute to photograph the damage. Try to send:

  • Something in shot to show the size
  • Natural light rather than flash
  • What it’s made of, if you know
  • A photo taken from further back

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

What we’re called out for in Victoria Park

Poor ventilation speeds things up: moisture sits on the joints longer, and mould takes hold.

Most people contact us after spotting something like this:

  • Gaps by the taps
  • Stained silicone
  • An untidy old seal
  • Leaks at the edges

Before booking anyone

  • What aftercare is recommended
  • Whether a trained technician does the job
  • How long it needs to cure
  • How the colour is matched

10 questions to ask before booking

About Victoria Park

Victoria Park is about 2 miles south-west of Cardiff, in Cardiff. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Victoria Park is one of 91 towns and villages in Cardiff we cover.

Postcode districts we cover here: CF5 and CF11. Local streets include Ely Road, Beda Road and Moors Lane, and we cover them all. You will find Victoria Park on the A4119, which makes it straightforward to reach. We also travel to Pwll-coch (1 mile west), Canton (1 mile south-east), Llandaff (1 mile north), Pontcanna (1 mile north-east) and Fairwater (1 mile west). Further out, we also cover Splott (3 miles east), Penylan (3 miles north-east), St Mellons (6 miles north-east), Llanrumney (5 miles north-east), Morristown (4 miles south) and Rhydwaedlyd (3 miles north).

Around Victoria Park

Our clients here include homes close to Thompson's Park, Fitzalan High School and Victoria Park Hotel. Nearby too are Lansdowne Primary School (less than half a mile south-east) and St Luke's Church (under half a mile south). The closest station to Victoria Park is Waun-Gron Park station, about 0.6 miles west of the centre. Nearby you’ll also find Museum of Welsh Cricket (1.1 miles east) and Rookwood Hospital (0.8 miles north-west). The countryside around Victoria Park includes Cock Hill and Glamorgan Canal / Long Wood.

Map of Victoria Park © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.