Lincolnshire · England
Bath & shower resealing (mastic) in Walcott, Lincolnshire
Bath resealing for Walcott, without a refit. Send us photos for a fixed quote, then we come to you.
- Silicone coming away from the tiles
- Mould you cannot clean out
- Stained silicone
Bath resealing at your home in Walcott
A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why so many DIY reseals peel. Whether it’s discoloured, yellow sealant and gaps in the seal, we can usually put it right, on shower trays & enclosures, wet rooms and baths alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Walcott (LN4)
- County
- Lincolnshire
- Guarantee
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath resealing in Walcott
Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
If you can see any of these, send us a photo:
- Silicone coming away from the tiles
- Damp near the bath
- An untidy old seal
- Old sealant that looks dirty
What to look for in a quote
- How the room is protected while they work
- How soon you can use it again
- How the colour is matched
- What happens if the damage is worse than the photos show
Walcott questions
How much does bath resealing cost in Walcott?
Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Are there extra charges for Walcott?
There’s no separate call-out charge. Your fixed price includes everything.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Why does the silicone keep cracking?
Something is moving. Persistent splitting can mean the support needs attention.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
How long does a reseal take?
A bath or shower generally takes a couple of hours. It then needs time to cure.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Very wide gaps that need a trim
- Hollow or loose tiles
- Water damage behind the bath that needs a builder
Send us pictures and we will tell you honestly.
Materials we repair
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Wet rooms
How we price bath resealing
We do not charge extra for travel to Walcott. The price depends on:
- Any earlier repairs that need removing first
- What the surface is made of
- How hard the colour is to match
- Whether we combine several jobs
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- A wider photo showing the whole bath or shower
- Natural light rather than flash
- A coin beside the damage so we can judge size
Send us pictures of the damage and a wider shot of the entire item, and tell us you’re in Walcott, and we will reply with a fixed quote.
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a couple of hours, including clearing up.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Let us know which floor the room is on
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
How to get a price
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll say immediately whether it can be repaired.
Related advice
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Walcott and the surrounding area
Walcott is about 8 miles north-east of Sleaford, in Lincolnshire. Clients in Walcott get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Our repair technicians cover 732 places across Lincolnshire. You can also see our page for Leeds, about 71 miles away.
Postcode districts we cover here: LN4. Streets in the area include High Street, The Smoot and Pinfold Lane, all of which we cover. If you’re just outside Walcott, we cover Digby (3 miles west), Dorrington (4 miles south-west), Anwick (4 miles south), Ruskington (5 miles south-west) and Ewerby (5 miles south). Further out, we also cover Lincoln (13 miles north-west), Boston (14 miles south-east), Sleaford (8 miles south-west), North Hykeham (13 miles north-west), Horncastle (11 miles north-east) and Birchwood (14 miles north-west).
What’s near Walcott
Locally, our jobs take us to homes close to Church of St Oswald and Walcott Primary School. For rail, the closest station is Metheringham station, roughly 4.5 miles north-west. Further afield, we also cover the area around Metheringham Airfield Visitor Centre (2.5 miles north-west).
Nearby places to Walcott
Other services in Walcott
Is resealing worth it?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why Walcott clients choose us
- One visit for most repairs
- CHAS and Constructionline accredited
- Same prices wherever you are
- We come to you, anywhere in the UK
Take a look at our prices page.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Baths
Baths are resealed with water in them, so the joint is at its widest.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Clean the joints with a mild cleaner
- Wipe the joints dry after use
- Reseal when black spots won’t clean off
- Let steam out after showers
Let it cure fully before using the bath or shower, typically around 24 hours.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.
About our accreditations · Every repair comes with a one-year guarantee.
