Gloucestershire · England
Bath Resealing in Wanswell
Fixed-price bath resealing in Wanswell and the surrounding area, normally in one visit and guaranteed for a year.
- Silicone smeared on tiles
- Mould you can’t clean out
- Discoloured, yellow sealant
Looking after it afterwards
To keep it looking its best:
- Ventilate the bathroom well
- Reseal at the first sign of lifting
- Air the room after use
- Clean the joints with a mild cleaner
Leave the sealant to cure for the time we give you, normally about a day.
Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
How we handle bath resealing in Wanswell
We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours. We’re frequently asked to fix gaps in the seal and gaps by the taps, on wet rooms, kitchen worktops & sinks and basins & vanity units.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Where
- Wanswell (GL13)
- Area hub
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Wanswell
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
Most people get in touch when they notice one of these:
- Gaps by the taps
- Black spots in the silicone
- Silicone smeared on tiles
- Sealant that is split or lifting
Before booking anyone
- What prep work is covered
- Whether the price covers travel
- How soon you can use it again
- Whether they match the colour on site
Also near Wanswell
Other services in Wanswell
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
We fill the bath before sealing, to open the joint fully.
Landlords, agents and businesses in Wanswell
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Where we work around Wanswell
Wanswell is about 7 miles north of Thornbury, in Gloucestershire. Wherever you are in the GL13 postcode area, we carry out the work at your property. Wanswell is one of 470 towns and villages in Gloucestershire where we work. Our nearest city page is Birmingham, about 58 miles away.
Here we cover the GL13 postcode area. Whether you live on Halmore Lane and Rookery Lane or anywhere nearby, a technician can come to you. Close by, we cover Sharpness (1 mile north-west), Halmore (1 mile north-east), Blakeney (4 miles north), Viney Hill (4 miles north-west) and Brain's Green (4 miles north). Within a short drive, we also cover Gloucester (14 miles north-east), Stroud (10 miles east), Quedgeley (11 miles north-east), Lydney (3 miles north-west), Tredworth (13 miles north-east) and Kingsway Village (11 miles north-east).
Landmarks near Wanswell
Locally, our jobs take us to homes close to SGS Berkeley Green UTC, St Andrew and Sharpness Primary School, among other places. Wanswell’s nearest station is Lydney station, about 3.2 miles west. Further afield, we also cover the area around Berkeley Castle (1.5 miles south) and Vale Community Hospital (4.6 miles east). For a walk, there is WWT Slimbridge.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What a repair can’t fix
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- Tiles that move, until they’re refixed
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Baths
How the visit works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes about two hours for a bath. Before we leave, we explain the curing time and the aftercare.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We ensure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Getting ready for the visit
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Your questions about bath resealing in Wanswell
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
How long does silicone take to cure?
Normally about a day later. We confirm before we leave.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
How do I stop mould in sealant?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
How we price bath resealing
Every quote is fixed and free. What we take into account:
- Doing more than one item at once
- The type of damage
- How many areas need work
- Whether old repairs or coatings need taking off
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
Phone photos are fine. Just ensure we can see:
- A coin beside the damage so we can judge size
- One picture of the whole bath or shower
- The postcode, so we can plan the visit
- Details of any past repairs
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
