West Berkshire · England
Bath & shower resealing (mastic) in Wash Water, West Berkshire
We travel to Wash Water for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Black mould in the sealant
- Damp near the bath
- Gaps by the taps
What bath resealing costs
Quotes are free and the price is fixed. What we look at:
- What kind of damage it is
- The material and finish
- How much damage there is
- Whether old repairs or coatings need taking off
Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- A picture taken from further back
- The material, if you know it
- Something in shot to show the size
- A close-up of the damage, in focus
Email us a picture of the damage and a wider shot of the entire item, with your RG20 postcode, and we’ll reply with a fixed price.
Bath resealing in Wash Water without replacing anything
We reseal baths, shower trays, basins and worktops. A typical reseal takes a couple of hours, plus curing time. We regularly repair basins & vanity units, wet rooms and baths, and the jobs we see most are water getting behind the bath or tray and silicone coming away from the tiles.
Every repair is covered by our one-year guarantee, wherever you are in West Berkshire.
- Area
- Wash Water (RG20)
- County
- West Berkshire
- Cover
- 12 months on all our work
- Quote
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Wash Water
Other services in Wash Water
Our work in Wash Water
Wash Water is about 3 miles south-west of Newbury, in West Berkshire. From the centre of Wash Water to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Wash Water is one of 155 places in West Berkshire where we work. Our nearest city page is London, about 55 miles away.
Here we cover the RG20 postcode area. That includes homes on Penwood Road and Andover Road and the roads around them. Neighbouring places we cover include Enborne Row (1 mile north-west), Wash Common (1 mile north-east), Newtown Common (1 mile east), Penwood (1 mile south-west) and Woolton Hill (1 mile south-west). Further out, we also cover Newbury (3 miles north-east), Thatcham (5 miles north-east), Burghfield Common (13 miles east), Speenhamland (3 miles north), Hungerford (8 miles north-west) and Calcot (14 miles east).
What’s near Wash Water
Our clients here include homes close to The Woodpecker pub, Sandleford Priory and Park House School, among other places. Nearby too are St Luke Church (1 mile north-east), Falkland Primary School (1 mile north) and Horris Hill School (0.8 miles east). For rail, the closest station is Newbury station, roughly 2.5 miles north-east. Well-known places in the area include British Balloon Museum & Library Ltd (2.8 miles north-east) and Hamstead Marshall 2 (2.9 miles north-west). Not far away are Sidown Hill and Audrey's Meadow.
Work for landlords and builders
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Resealing in Wash Water: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why us?
- We leave the room as we found it
- Technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- Every repair guaranteed for a year
Read our full price list.
Questions from Wash Water
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Why does mould come back so fast?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How do I get a price for bath resealing in Wash Water?
We give a fixed price from your photos. Send a close-up and a picture of the whole item with your RG20 postcode.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we will ask for another angle.
What we can’t put right
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Gaps so wide they need filling or trims before sealing
- Hollow or loose tiles
- Rotten walls or floors behind the bath
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes around two hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
- Open a window if you can
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Read more
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Reseal when black spots will not clean off
- Keep bottles off the joints
- Clean the joints with a mild cleaner
- Let steam out after showers
Run the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
