West Berkshire · England
Bath Re-enamelling for Wash Water homes
We travel to Wash Water for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Brown or grey marks that do not clean off
Bath re-enamelling at your home in Wash Water
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and the jobs we see most are a period or roll-top bath worth keeping and lots of chips and rust spots.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Wash Water (RG20)
- Area hub
- West Berkshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Landlord and trade work in Wash Water
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
When to call us in Wash Water
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- Stains that will not shift
- A roll-top that’s seen better days
What to look for in a quote
- What happens if the damage is worse than the photos show
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- Who will actually do the work
What a repair cannot fix
We will not take on work that won’t last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Repair or replace: which is better?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why book with us
- Everything repaired in place
- Same prices wherever you are
- Fixed prices from your photos
- Every repair guaranteed for a year
See our prices page and resurfacing vs replacement cost guide.
Nearby places to Wash Water
More services for Wash Water
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The material
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- Where you are, by postcode
- Any details about the material
- A wider photo showing the entire bath
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Your questions about bath re-enamelling in Wash Water
How much does bath re-enamelling cost in Wash Water?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Our work in Wash Water
Wash Water is about 3 miles south-west of Newbury, in West Berkshire. Our technicians come to clients in Wash Water and nearby villages, so nothing has to leave your home. We cover 155 places in West Berkshire. We work right across the region, from Wash Water to London (about 55 miles away).
Here we cover the RG20 postcode area. From Penwood Road and Andover Road or anywhere nearby, we can come to you. Neighbouring places we cover include Enborne Row (1 mile north-west), Wash Common (1 mile north-east), Newtown Common (1 mile east), Penwood (1 mile south-west) and Woolton Hill (1 mile south-west). Larger places within reach include Newbury (3 miles north-east), Thatcham (5 miles north-east), Burghfield Common (13 miles east), Speenhamland (3 miles north), Hungerford (8 miles north-west) and Calcot (14 miles east).
Landmarks near Wash Water
We visit homes around The Woodpecker pub, Sandleford Priory and Park House School and the streets around them. Nearby too are St Luke Church (1 mile north-east), Falkland Primary School (1 mile north) and Horris Hill School (0.8 miles east). For rail, the closest station is Newbury station, about 2.5 miles north-east. Well-known places in the area include British Balloon Museum & Library Ltd (2.8 miles north-east) and Hamstead Marshall 2 (2.9 miles north-west). Green spaces nearby include Sidown Hill and Audrey's Meadow.
How to care for the repair
To keep it looking its best for years:
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
