Hampshire · England

Bath Resealing in Weavers Down

Bath resealing for Weavers Down, without a refit. Get a fixed quote from your photos, then we come to you.

  • Sealant that’s split or lifting
  • Discoloured, yellow sealant
  • Black mould in the sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Weavers Down homes

Bath resealing in Weavers Down without replacing anything

Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours. Typical jobs include discoloured, yellow sealant and gaps by the taps, on shower trays & enclosures, basins & vanity units and kitchen worktops & sinks.

All of our repairs are guaranteed for twelve months in Weavers Down and everywhere else. We return to put right any problem with the work.

Where
Weavers Down (GU30)
County
Hampshire
Warranty
One year on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Landlords, agents and businesses in Weavers Down

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Where we work around Weavers Down

Weavers Down is about 7 miles north-east of Petersfield, in Hampshire. Jobs in Weavers Down are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Weavers Down is one of 683 places in Hampshire we cover. We work right across the region, from Weavers Down to London (about 43 miles away).

Our repair technicians cover all of GU30. Local streets include Bircholt Road, Longmoor Drive and Beechcroft Close, and we cover them all. Neighbouring places we cover include Conford (1 mile north), Passfield (1 mile north), Liphook (1 mile east), Longmoor (2 miles west) and Woolmer (2 miles west). Further out, we also cover Farnborough (15 miles north), Fleet (14 miles north), Horndean (14 miles south-west), Aldershot (12 miles north), Alton (8 miles north-west) and Petersfield (7 miles south-west).

Landmarks near Weavers Down

We visit homes around Liphook Church of England Controlled Junior School and Bohunt School. Weavers Down’s nearest station is Liphook station, roughly 1.5 miles east of the centre. A little further out are Chase Community Hospital (2.3 miles north-west). Open spaces near Weavers Down include Wheeler's Down and Deadwater Valley.

Map of Weavers Down © OpenStreetMap contributors

Looking after it afterwards

Looking after the surface is easy:

  • Keep bottles off the joints
  • Clean the joints with a mild cleaner
  • Wipe the joints dry after use
  • Use the extractor fan

Let it cure fully before using the bath or shower, normally about a day.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Questions from Weavers Down

Why does my sealant keep splitting?

Something is moving. If it keeps happening, the support may need fixing.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

How do I book?

Some photos, your postcode and how to reach you. On the day, access to the room.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How do I stop mould in sealant?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Can new silicone go over old?

Never over old. The old sealant is cut out and the joint cleaned and dried.

How long does resealing take?

A bath or shower typically takes a couple of hours. It then needs time to cure.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Is resealing worth it?

Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

What you get with us

  • Every repair guaranteed for a year
  • Work done at your home or business
  • No extra charge for your area
  • Dust sheets down, tidy finish

Take a look at our prices page.

Common problems we fix in Weavers Down

Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.

Look out for these signs:

  • Discoloured, yellow sealant
  • Sealant that’s split or lifting
  • An untidy old seal
  • Damp near the bath

Questions to ask before booking

  • How long it needs to cure
  • How your room will be protected
  • The length of the guarantee and what it covers
  • What happens if they find more damage

Choosing a repair company

When a repair is not the answer

To be straight with you, some problems need a different fix:

  • Rotten walls or floors behind the bath
  • Tiles that move, until they’re refixed
  • Very wide gaps that need a trim

If in doubt, send photos and we will say what we think before you book.

Materials we work on in Weavers Down

  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms
  • Baths

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a couple of hours, and we finish by cleaning up and talking you through the result.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Tell us if there are stairs or a lift
  • Avoid using the area for a few hours before we arrive

How to get a price

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Send photos for a quote

Read more

Repairs by material

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.