Greater London · England

Bath & shower resealing (mastic) in Wennington, Greater London

Bath resealing in and around Wennington: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Silicone coming away from the tiles
  • A messy previous reseal
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Wennington

Bath resealing in Wennington without replacing anything

We reseal baths with them filled with water, so the joint is at its widest, so the seal does not tear when the bath is first used. Typical jobs include mould you can’t clean out and discoloured, yellow sealant, across shower trays & enclosures, wet rooms and kitchen worktops & sinks.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Roll-top bath being refinished by a Surface Doctor technician
Area
Wennington (RM13)
Area hub
Greater London
Warranty
12 months on all our work
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

Resealing in Wennington: why it matters

A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. The price reflects the work involved, not your postcode. You will see the full price before booking.

Why Wennington customers choose us

  • Everything repaired in place
  • Rooms protected and left tidy
  • We will tell you if it’s not worth repairing
  • One price list for the whole UK

Read our pricing.

Do you need bath resealing in Wennington?

Poor ventilation speeds things up: moisture sits on the joints longer, and mould takes hold.

It’s worth getting a quote if you see:

  • Water getting behind the bath or tray
  • Black mould in the sealant
  • Missing sealant behind the taps
  • Silicone coming away from the tiles

Comparing quotes

  • What happens if they find more damage
  • Aftercare advice
  • What the guarantee covers, and for how long
  • What protection goes down before work starts

How to compare quotes

How the visit works

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a couple of hours from start to finish. Before leaving, we tell you how long to leave it and how to look after it.

  1. First we strip out every bit of the old mastic.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Keep children and pets away from the room on the day
  • Mention any parking restrictions or tricky access

Get a quote

Upload a picture of the damage and a wider shot of the entire item, with your RM13 postcode, and we will come back with a fixed quote.

Get a fixed price

Read more

Wennington questions

Why does the silicone keep cracking?

Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.

Are there extra charges for Wennington?

Travel is included in the price, with the same prices everywhere we work.

Why does mould come back so fast?

Normally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

How long does silicone take to cure?

Normally after around 24 hours. We confirm before we leave.

Can you reseal over the old silicone?

We always remove the old sealant completely. New silicone won’t bond to old.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Baths

We fill the bath before sealing, to open the joint fully.

Keeping it looking good

Much of the damage we repair could have been avoided. A few tips:

  • Keep the joints dry
  • Replace the seal when mould sets in
  • Run the extractor fan during and after showers
  • Let steam out after showers

Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.

Black mould in sealant is not just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.

About Wennington

Wennington is about 4 miles south of Hornchurch, in Greater London. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We cover all 764 towns and villages in Greater London. You can also see our page for London, about 14 miles away.

Our visits in RM13 are booked in the same way as anywhere else. Nearby, we also work in Aveley (1 mile east), Hacton (2 miles north), South Ockendon (3 miles east), Upminster Bridge (4 miles north) and Hornchurch (4 miles north). We also work in nearby towns such as London (14 miles west), St Pancras (15 miles west), Shoreditch (13 miles west), Walthamstow (12 miles north-west), Hoxton (13 miles west) and Whitechapel (12 miles west).

Around Wennington

Locally, our jobs take us to homes close to Wildspace Conservation Park, Lennard Arms Inn and The Chafford School, among other places. Other local landmarks include Brady Primary School (0.8 miles north-west), Harris Academy Rainham (0.9 miles north-west) and St Mary and St Peter's Church (within half a mile west). The closest station to Wennington is Rainham (Essex) station, roughly 1.4 miles north-west. A little further out are St George's Hospital (2.8 miles north) and Erith Museum (2.5 miles south-west). The countryside around Wennington includes Rainham Marshes Nature Reserve.

Map of Wennington © OpenStreetMap contributors

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

When a repair is not the answer

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Very wide gaps that need a trim
  • Water damage behind the bath that needs a builder
  • Movement in the bath or tray

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Basins & vanity units
  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Baths

What bath resealing costs

We price every job individually. The main factors are:

  • Doing more than one item at once
  • Where the damage is and how we get to it
  • The material and finish
  • Unusual colours or finishes

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.

How to get a fixed price

The better the pictures, the more accurate the price. Here’s what helps:

  • A close-up of the damage, in focus
  • A wider photo showing the entire bath or shower
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.