Devon · England

Bath Resealing for Yeoford homes

Our technicians come to Yeoford for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.

  • Black mould in the sealant
  • Sealant that is split or lifting
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Yeoford

About our bath resealing in Yeoford

A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. If you are dealing with discoloured, yellow sealant and sealant that’s split or lifting, we can help, on baths, shower trays & enclosures and wet rooms alike.

Every job is backed for twelve months in Yeoford and everywhere else. We return to put right any problem with the work.

Where
Yeoford (EX17)
Region
Devon
Warranty
A year, on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How we price bath resealing

Every quote is fixed and free. What we look at:

  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • How many items we do on one visit

Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

How to get a fixed price

A couple of clear pictures is all it takes. Try to include:

  • A photo taken from further back
  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Your questions about bath resealing in Yeoford

Why does my sealant keep going mouldy?

Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before and we will plan for it.

Can new silicone go over old?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

How long before I can shower?

Normally about a day later. We will tell you the exact time.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Why does the silicone keep cracking?

Usually because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.

Are there extra charges for Yeoford?

Travel is included in the price, and we charge the same wherever you are.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

What we’re called out for in Yeoford

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.

You may need us if you’ve spotted any of these:

  • A messy previous reseal
  • Silicone coming away from the tiles
  • Missing sealant behind the taps
  • Stained silicone

Questions to ask before booking

  • Whether cleaning and preparation are in the price
  • Whether the price is fixed and includes VAT
  • What happens if the damage is worse than the photos show
  • Who will actually do the work

10 questions to ask before booking

Work for landlords and builders

We work for landlords, letting agents and housing providers in Yeoford as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We carry out planned and one-off repairs for housing associations and facilities teams in Devon and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Honest limits

Before booking, it’s worth knowing the limits:

  • Hidden water damage
  • Loose tiles, which need refixing first
  • A bath or tray that moves, until its support is fixed

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
  • Wet rooms

Resealing in Yeoford: why it matters

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Yeoford clients choose us

  • Normally one visit, start to finish
  • Fixed prices from your photos
  • We come to you, anywhere in the UK
  • Rooms protected and left tidy

See our full price list.

Where we work around Yeoford

Yeoford is about 10 miles west of Exeter, in Devon. From the centre of Yeoford to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Yeoford is one of 586 places in Devon we cover.

Jobs in EX17 are booked in the same way as anywhere else. From Station Road, The Oaks and Yeoford Meadows or a nearby road, a technician can come to you. We also cover the places around Yeoford: Penstone (1 mile north-west), Coleford (2 miles north-west), Cheriton Bishop (3 miles south), Hittisleigh (4 miles south-west) and Crockernwell (4 miles south-west). Larger places within reach include Exeter (10 miles east), Tiverton (14 miles north-east), Okehampton (12 miles west), St Thomas (9 miles south-east), Larkbeare (10 miles south-east) and Polsloe (10 miles east).

What’s near Yeoford

Typical jobs here are in homes near Yeoford Community Primary School, Holy Trinity and The Duck at Yeoford pub. Yeoford has its own railway station: Yeoford station. Further afield, we also cover the area around Crediton Hospital (2.6 miles north-east) and Crediton Museum (3.1 miles east).

Map of Yeoford © OpenStreetMap contributors

How the visit works

On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to about two hours for a bath, tidy-up included.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Preparing for the visit

  • Open a window if you can
  • Ensure the area is dry
  • Have somewhere for us to park nearby if possible

Getting a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a fixed price

Read more

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Do not stand toiletries on the seal
  • Clean the joints with a mild cleaner
  • Reseal when black spots will not clean off
  • Run the extractor fan during and after showers

Let it cure fully before using the bath or shower, typically around 24 hours.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.