Kent · England
Coloured Bath Resurfacing in Beltinge
Our technicians come to Beltinge for resurfacing coloured baths, basins and trays in white. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Selling or letting a home with an old suite
- A suite that doesn’t match a new bathroom
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- The inside of a toilet bowl, unless we’ve agreed it will last
- Items cracked right through
- Fittings and taps (these are masked, not recoloured)
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Avocado, pampas and pink baths
- Coloured shower trays
- Coloured basins
- Whole bathroom suites
Coloured bath resurfacing in Beltinge, done in place
Most suites take one or two days. We resurface the bath, basin and tray in place, so there’s no plumbing or tiling. If you’re dealing with a suite that doesn’t match a new bathroom and a dated coloured suite you’d like in white, we can usually put it right.
A one-year guarantee comes as standard, so you’re covered after the visit. Treat it like any resurfaced bath: mild cleaners and no suction mats.
- Area
- Beltinge (CT6)
- County
- Kent
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Beltinge
Also in Beltinge
Why repair rather than replace?
Swapping a coloured suite for a white one means new sanitaryware, a plumber and a tiler. Resurfacing turns it white without taking anything out. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
See our prices page or bath cost comparison.
Questions from Beltinge
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you cover the entire of Kent?
All of Kent, and the rest of the UK. There is no extra charge for travel.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you work in Beltinge?
We do. We send a technician to Beltinge for every job, with no extra charge for travel.
What about the toilet?
Ask us. A toilet bowl is constantly wet, so we will tell you what will last.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Beltinge. The price depends on:
- How many items we do on one visit
- The colour and finish to match
- Any earlier repairs that need removing first
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Beltinge and nearby
Beltinge is about 1 mile east of Herne Bay, in Kent. Jobs in Beltinge are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Beltinge is one of 922 towns and villages in Kent where we work. Our nearest city page is London, about 55 miles away.
Jobs in CT6 are booked in the same way as anywhere else. From Manor Road, Puffin Road and Cliff Avenue or a nearby road, we can come to you. Other places close to Beltinge include Bishopstone (1 mile east), Hillborough (1 mile south-east), Hawthorn (1 mile south-east), Broomfield (1 mile south) and Herne Bay (1 mile west). Larger places within reach include Canterbury (7 miles south-west), Margate (10 miles east), Ramsgate (11 miles east), Broadstairs (12 miles east), Whitstable (6 miles west) and Deal (15 miles south-east).
Local landmarks in Beltinge
Locally, our jobs take us to homes close to Bishopstone Cliffs, Reculver Church of England Primary School and Herne Bay High School and the streets around them. Beltinge’s nearest station is Herne Bay station, about 1.9 miles west of the centre. Other landmarks nearby include Whitstable and Tankerton Hospital (4.8 miles west). Green spaces nearby include West Blean and Thornden Woods.
When to call us in Beltinge
Avocado, pampas and pink suites were everywhere in the 70s and 80s, and plenty are still in good condition. The problem is usually the colour, not the bath.
Send us a photo if you notice any of these:
- A dated coloured suite you’d like in white
- Selling or letting a home with an old suite
- A suite that doesn’t match a new bathroom
- Faded or patchy colour
What to look for in a quote
- What prep work is covered
- How your room will be protected
- How the colour is matched
- How long the guarantee is and what it covers
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
What we do, step by step
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It typically takes one to two days for a full suite, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- We clean, degrease and repair any chips.
- We prepare the surface and apply a bonding primer.
- The new white, or other colour, finish is sprayed on.
- Once cured, normally by the following day, the suite is ready.
How to prepare
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
