Redcar and Cleveland · England

Coloured Bath Resurfacing in Runswick Bay

Coloured bath resurfacing for Runswick Bay, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Resurfacing from £350
  • Faded or patchy colour
  • A dated coloured suite you’d like in white
Surface Doctor technician refinishing the outside of a roll-top bath

Coloured bath resurfacing near Runswick Bay

Questions from Runswick Bay

Can you turn my avocado bath white?

Yes. It’s resurfaced in white where it stands.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What if the damage is worse than the pictures show?

Your quote covers the damage in the pictures. If there is more, we will tell you before starting.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Do the materials smell?

There may be a mild smell during the work, which fades afterwards.

Coloured bath resurfacing in Runswick Bay, done in place

A full suite is usually done in one to two days. We resurface the bath, basin and tray in place, with no new plumbing or tiling. Whether it’s a suite that doesn’t match a new bathroom and faded or patchy colour, we can help.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it. Treat it like any resurfaced bath: gentle cleaners, no suction mats.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Runswick Bay (TS13)
County
Redcar and Cleveland
Guarantee
One year on every repair
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

When we would advise against a repair

We won’t take on work that won’t last, so these are the limits:

  • The inside of a toilet bowl, unless we’ve agreed it will last
  • Items cracked right through
  • Fittings and taps (these are masked, not recoloured)

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Coloured basins
  • Avocado, pampas and pink baths
  • Coloured shower trays
  • Whole bathroom suites

Repair or replace in Runswick Bay?

Swapping a coloured suite for a white one involves a plumber, a tiler and new taps. Refinishing it in white changes the colour with everything left in place. Our coloured bath resurfacing starts from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Why us?

  • One-year guarantee on every repair
  • Colours mixed by hand to suit your surface
  • Same prices wherever you are
  • No need to remove anything

See our prices page or guide to resurfacing and replacement costs.

What affects the price in Runswick Bay

Resurfacing from £350. We charge the same across the UK, including Runswick Bay. The price reflects:

  • Where the damage is and how we get to it
  • What the surface is made of
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Quotes from your photos

When you take your pictures, these tips help us give you a firm price:

  • A coin beside the damage so we can judge size
  • A wider photo showing the whole suite
  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare

If you are in Runswick Bay and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

What happens on the day

Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes one to two days for a full suite, and we leave the room as we found it.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease everything and fix chips.
  3. We key the surface and apply a bonding primer.
  4. We spray the new white (or other colour) finish.
  5. We leave everything to cure, normally until the following day.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift

Getting a price

Upload a photo of the damage and one of the entire item, and tell us you’re in Runswick Bay, and we’ll come back with a fixed quote.

Get a free quote

Read more

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

For anyone letting property in or around Runswick Bay, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.

Our work in Runswick Bay

Runswick Bay is about 6 miles north-west of Whitby, in Redcar and Cleveland. Customers in Runswick Bay get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Runswick Bay is one of 48 towns and villages in Redcar and Cleveland where we work. Our jobs stretch from Runswick Bay to Newcastle upon Tyne (about 47 miles away).

All of TS13 is covered, from the main roads to the quietest streets. From Nettledale Close, Ellerby Lane and Lingrow Close or anywhere nearby, a technician can come to you. Other places close to Runswick Bay include Hinderwell (1 mile west), Ellerby (1 mile south-west), Port Mulgrave (1 mile north-west), Newton Mulgrave (1 mile west) and Mickleby (2 miles south). Larger places within reach include Redcar (13 miles west), Guisborough (12 miles west), Marske-by-the-Sea (11 miles west), Skelton-in-Cleveland (9 miles west), Skelton (9 miles west) and Brotton (8 miles west).

Around Runswick Bay

Our customers here include homes close to Church of St Hilda, Oakridge Community Primary School and The Brown Cow pub and the streets around them. Further afield, we also cover the area around Mulgrave Castle (3.5 miles south-east) and Staithes Museum (2.2 miles north-west).

Map of Runswick Bay © OpenStreetMap contributors

When to call us in Runswick Bay

Coloured suites were fitted in huge numbers in the 1970s and 80s, and plenty are still in good condition. The problem is typically the colour, not the bath.

The most common problems we’re called about are:

  • A dated coloured suite you’d like in white
  • Selling or letting a home with an old suite
  • Faded or patchy colour
  • A suite that doesn’t match a new bathroom

What to look for in a quote

  • Whether the price covers travel
  • How the room is protected while they work
  • Whether the price is fixed and includes VAT
  • Whether they match the colour on site

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.