Redcar and Cleveland · England
Non-slip bath & shower coating in Runswick Bay, Redcar and Cleveland
Non-slip bath coating in and around Runswick Bay: photo quotes, tidy work and a year’s guarantee.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
When a repair isn’t the answer
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Resurfaced baths
- Enamelled baths
How we handle non-slip bath coating in Runswick Bay
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our technicians work on resurfaced baths, wet room floors (ask us) and acrylic baths, and people most frequently call us about safety for older or less mobile people and bath mats that harbour mould or get forgotten.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Runswick Bay (TS13)
- Region
- Redcar and Cleveland
- Warranty
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What non-slip bath coating costs
We give every job a fixed price from photos. These are the things that affect it:
- What the surface is made of
- Previous DIY repairs that have to come out
- How hard the colour is to match
- How much damage there is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
For a price in Runswick Bay, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
Why Runswick Bay clients choose us
- Nothing taken out or refitted
- One price list for the whole UK
- A year’s guarantee on all work
- Honest advice, even when it means no job
Take a look at our prices page.
When to call us in Runswick Bay
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
If you can see any of these, send us a photo:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What your quote should include
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, normally overnight.
Preparing for the visit
- Let us know about parking or access
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Runswick Bay questions
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you work in Runswick Bay?
Yes, we do. We send a technician to Runswick Bay for every job, with no extra charge for travel.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
How much does non-slip bath coating cost in Runswick Bay?
Because every job differs, we price from photos. You know the full cost before anything is booked.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Also near Runswick Bay
Other services in Runswick Bay
Runswick Bay and nearby
Runswick Bay is about 6 miles north-west of Whitby, in Redcar and Cleveland. From the centre of Runswick Bay to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Runswick Bay is one of 48 places in Redcar and Cleveland we cover. We work right across the region, from Runswick Bay to Newcastle upon Tyne (47 miles away).
Our visits in TS13 are booked in the same way as anywhere else. That includes homes on Nettledale Close, Ellerby Lane and Lingrow Close and the roads around them. Neighbouring places we cover include Hinderwell (1 mile west), Ellerby (1 mile south-west), Port Mulgrave (1 mile north-west), Newton Mulgrave (1 mile west) and Mickleby (2 miles south). Larger places within reach include Redcar (13 miles west), Guisborough (12 miles west), Marske-by-the-Sea (11 miles west), Skelton-in-Cleveland (9 miles west), Skelton (9 miles west) and Brotton (8 miles west).
Local landmarks in Runswick Bay
In Runswick Bay, that means homes near Church of St Hilda, Oakridge Community Primary School and The Brown Cow pub. Further afield, we also cover the area around Mulgrave Castle (3.5 miles south-east) and Staithes Museum (2.2 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
