Gloucestershire · England
Coloured Bath Resurfacing in Steam Mills
Coloured bath resurfacing across Steam Mills and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Selling or letting a home with an old suite
- A suite that doesn’t match a new bathroom
Coloured bath resurfacing in Steam Mills, done in place
We resurface the bath, basin and tray in place, with no new plumbing or tiling. A full suite is generally done in one to two days. We are often asked to fix selling or letting a home with an old suite and faded or patchy colour, on avocado, pampas and pink baths, whole bathroom suites and coloured shower trays.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it. Treat it like any resurfaced bath: gentle cleaners, no suction mats.
- Where
- Steam Mills (GL14, GL17)
- County
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- The inside of a toilet bowl, unless we’ve agreed it will last
- Items cracked right through
- Fittings and taps (these are masked, not recoloured)
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Coloured basins
- Whole bathroom suites
- Coloured shower trays
- Avocado, pampas and pink baths
What happens on the day
The work is clean and fairly quiet. Protection goes down first, then the job itself takes one to two days for a full suite. Before we leave, we explain how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- We clean, degrease and repair any chips.
- The surface is prepared and primed.
- The new white, or other colour, finish is sprayed on.
- Once cured, normally by the day after, the suite is ready.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Make sure the room can be ventilated
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Repair or replace: which is better?
Swapping a coloured suite for a white one involves new sanitaryware, a plumber and a tiler. Refinishing it in white turns it white without taking anything out. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why Steam Mills customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Typically one visit, start to finish
- Technicians who travel to you, UK-wide
Take a look at our full price list or guide to resurfacing and replacement costs.
Landlords, agents and businesses in Steam Mills
If you manage property in Steam Mills, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About Steam Mills
Steam Mills is about 6 miles south-east of Ross-on-Wye, in Gloucestershire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our repair technicians cover all 470 towns and villages in Gloucestershire. Our jobs stretch from Steam Mills to Birmingham (51 miles away).
We work across GL14 and GL17 and the streets around it. From Whimsey Road, Broadmoor Road and Steam Mills Road or anywhere nearby, a technician can come to you. If you’re just outside Steam Mills, we cover Harrow Hill (1 mile north), Drybrook (1 mile north), Ruardean Hill (1 mile north-west), Cinderford (1 mile south-east) and Ruardean Woodside (1 mile north-west). Within a short drive, we also cover Gloucester (12 miles east), Stroud (14 miles south-east), Brockworth (15 miles east), Quedgeley (10 miles east), Lydney (8 miles south) and Innsworth (14 miles east).
What’s near Steam Mills
We visit homes around Church of the Holy Trinity, Forest E-ACT Academy and Laymoor Quag. Other landmarks nearby include Ruardyn Castle (2.1 miles north-west) and Dilke Memorial Hospital (1.9 miles south). Open spaces near Steam Mills include Ruardean Hill and Foxes Bridge Bog.
Common problems we fix in Steam Mills
Avocado, pampas and pink suites were everywhere in the 70s and 80s, and plenty are still in good condition. It’s normally the colour that dates them, not the condition.
Signs it’s time to call us include:
- Faded or patchy colour
- A suite that does not match a new bathroom
- A dated coloured suite you’d like in white
- Selling or letting a home with an old suite
What your quote should include
- How soon you can use it again
- Whether cleaning and preparation are in the price
- How the colour is matched
- What the guarantee covers, and for how long
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Places near Steam Mills
Other services in Steam Mills
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- How many items we do on one visit
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- One picture of the whole suite
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll say straight away whether it can be repaired.
Your questions about coloured bath resurfacing in Steam Mills
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
What happens after I send photos?
You will get a fixed quote back, plus dates. There is no obligation to book.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
About our accreditations · Every repair comes with a one-year guarantee.
