Gloucestershire · England
Kitchen sink & door repair in Steam Mills, Gloucestershire
Kitchen sink repair for Steam Mills, without a refit. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Chipped door and drawer edges
- Chips in ceramic sinks
Kitchen sink repair in Steam Mills, done in place
Doors with a large area of lifted vinyl usually need re-wrapping or replacing; we fix chips, dents and local damage. Repairs are matched to the original finish, so you don’t need replacement parts. Whether it’s damage from fitting or moving appliances and cracks around the waste, we can typically put it right.
All our work is covered by our one-year guarantee. Use a sink mat or bowl for heavy pans, and dry the door edges after spills.
- Location
- Steam Mills (GL14, GL17)
- Area hub
- Gloucestershire
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Steam Mills
Dropped pans chip ceramic sinks, and cupboard doors get knocked by chairs, bins and vacuum cleaners.
Look out for any of the following:
- Chipped door and drawer edges
- Cracks around the waste
- Dents and scuffs on cabinets
- Damage from fitting or moving appliances
Questions to ask before you book
- How changes to the job are handled
- Who will actually do the work
- What protection goes down before work starts
- How long the guarantee is and what it covers
How we price kitchen sink repair
Repairs from £95. We price every job individually, from your photos. The main factors are:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Where the damage is and how we get to it
Our prices are the same across the UK, with no extra for Steam Mills. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
You can take the pictures on your phone. Ensure they show:
- Any details about the material
- A picture taken from further back
- Details of any past repairs
- The postcode, so we can plan the visit
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Common questions in Steam Mills
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair cupboard doors?
Yes. We repair chips, dents and scuffs on most door finishes.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- We start by preparing the damage.
- Next we fill the chips and rebuild any edges.
- The repair is sanded to the original profile.
- The colour is matched to the sink or door finish.
- Finally we polish or seal it.
How to prepare
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire sink or cupboard door, we can price the job the same day in most cases.
Related advice
What we can’t put right
In fairness, some problems need a different fix:
- Doors where the vinyl wrap has lifted across a large area
- Doors swollen by water
- Sinks cracked through the base
Send us photos and we will tell you honestly before you book.
Materials we work on in Steam Mills
- Cabinet ends & plinths
- Composite sinks
- Ceramic Belfast & butler sinks
- Gloss and matt cupboard doors
- Vinyl-wrapped doors
Covering Steam Mills
Steam Mills is about 6 miles south-east of Ross-on-Wye, in Gloucestershire. Whether you are in the middle of Steam Mills or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in 470 places across Gloucestershire. Our jobs stretch from Steam Mills to Birmingham (51 miles away).
Our repair technicians cover all of GL14 and GL17 and the streets around it. Jobs here include addresses on Whimsey Road, Broadmoor Road and Steam Mills Road and the roads around them. We also travel to Harrow Hill (1 mile north), Drybrook (1 mile north), Ruardean Hill (1 mile north-west), Cinderford (1 mile south-east) and Ruardean Woodside (1 mile north-west). Further out, we also cover Gloucester (12 miles east), Stroud (14 miles south-east), Brockworth (15 miles east), Quedgeley (10 miles east), Lydney (8 miles south) and Innsworth (14 miles east).
Near you in Steam Mills
In Steam Mills, that means homes near Church of the Holy Trinity, Forest E-ACT Academy and Laymoor Quag, among other places. Other landmarks nearby include Ruardyn Castle (2.1 miles north-west) and Dilke Memorial Hospital (1.9 miles south). The countryside around Steam Mills includes Ruardean Hill and Foxes Bridge Bog.
Landlords, agents and businesses in Steam Mills
Landlords, letting agents and housing providers in Steam Mills use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Towns and villages near Steam Mills
More services for Steam Mills
Why repair rather than replace?
Replacing a sink or door may mean disturbing the worktop and plumbing, or finding a matching door that’s been discontinued. A repair leaves everything in place. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Straight answers about what a repair can do
Read our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
