Gwynedd · Wales
Non-slip bath & shower coating in Aber-pwll, Gwynedd
Our technicians come to Aber-pwll for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Aber-pwll without replacing anything
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Our technicians work on acrylic baths, wet room floors (ask us) and resurfaced baths, and common reasons people get in touch are worn-out textured areas and a bath or tray that is slippery when wet.
We stand behind the work with a one-year guarantee, so you are covered after the visit. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Aber-pwll (LL56, LL57)
- Area hub
- Gwynedd
- Guarantee
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Aber-pwll
Aber-pwll is about 3 miles south-west of Bangor, in Gwynedd. Across the LL56 area, we come to you. We cover all 165 towns and villages in Gwynedd. You can also see our page for Liverpool, about 54 miles away.
Jobs in LL56 and LL57 work the same way as everywhere else we cover. From Aber Pwll, Bangor Street and Ffordd Glyder or a nearby road, a technician can come to you. We also cover the places around Aber-pwll: Bryn-y-waen (1 mile south), Glasgoed (3 miles south), Pont-Rhythallt (3 miles south), Rhyd-y-groes (3 miles east) and Penisa'r Waun (3 miles south-east). We also work in nearby towns such as Bangor (3 miles north-east), Caernarfon (5 miles south-west), Bethesda (6 miles east), Hirael (4 miles north-east), Upper Bangor (4 miles north-east) and Glanadda (3 miles north-east).
Local landmarks in Aber-pwll
In Aber-pwll, that means homes near Port Church and Port Church House, Ty Hanner Ffordd pub and Ysgol Glanaethwy. Aber-pwll’s nearest station is Llanfairpwll station, about 2.1 miles north of the centre. A little further out are Ysbyty Gwynedd (1.9 miles north-east) and Bon y Dom (1.2 miles south-west). Green spaces nearby include Bryn Ty-mawr.
Aber-pwll questions
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How much does non-slip bath coating cost in Aber-pwll?
Because every job differs, we price from photos. You’ll get a fixed figure before booking.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
What happens next?
We come back with a fixed quote. You’re under no obligation.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Are there extra charges for Aber-pwll?
Travel is included in the price, and we charge the same wherever you are.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Towns and villages near Aber-pwll
What else we do in Aber-pwll
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
- Keep children and pets away from the room on the day
How to get a price
For a price in Aber-pwll, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What a repair cannot fix
Some jobs are not right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
Signs you need non-slip bath coating in Aber-pwll
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Customers usually contact us about:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Questions to ask before booking
- Who turns up on the day
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
Repair or replace in Aber-pwll?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- CHAS and Constructionline accredited
- No extra charge for your area
See our pricing.
What non-slip bath coating costs
We do not charge extra for travel to Aber-pwll. The price comes down to:
- Doing more than one item at once
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the pictures on your phone. Just make sure we can see:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath or shower tray
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
