Vale of Glamorgan · Wales

Non-Slip Bath Coating for Aberthin homes

Non-slip bath coating in and around Aberthin: photo quotes, tidy work and a year’s guarantee.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Aberthin

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Non-slip bath coating in Aberthin, done in place

It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. We regularly repair acrylic baths, shower trays and enamelled baths, and common reasons people contact us are resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten.

We stand behind the work with a one-year guarantee, so you are covered after the visit. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Location
Aberthin (CF71)
Area hub
Vale of Glamorgan
Warranty
One year on every repair
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Signs you need non-slip bath coating in Aberthin

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Look out for any of the following:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

Questions to ask before booking

  • Whether the price covers travel
  • Whether a trained technician does the job
  • What prep work is covered
  • Whether they match the colour on site

Our hiring checklist

Our work in Aberthin

Aberthin is about 7 miles south-east of Bridgend, in the Vale of Glamorgan. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 67 towns and villages across the Vale of Glamorgan.

Jobs in CF71 work the same way as everywhere else we cover. Jobs here include addresses on Pen-y-Lan Road, Llanquian Road and Court Close. Neighbouring places we cover include Cowbridge with Llanblethian (1 mile south-west), East Village (1 mile south-west), Cowbridge (1 mile west), West Village (1 mile west) and Ystradowen (2 miles north). We also work in nearby towns such as Barry (8 miles south-east), Penarth (11 miles east), Gibbonsdown (8 miles south-east), Cadoxton (8 miles south-east), Dinas Powys (9 miles east) and Llantwit Major (5 miles south-west).

Around Aberthin

Locally, our jobs take us to homes close to The Hare and Hounds pub, Cowbridge Comprehensive School and Church of the Holy Cross, among other places. The nearest railway station is Pontyclun station, roughly 4.2 miles north of the centre. A little further out are Royal Glamorgan Hospital (5.7 miles north) and Cowbridge and District Museum (1 mile west). Not far away are Nant Dyfrgi Pool and Bryn Owen.

Map of Aberthin © OpenStreetMap contributors

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.

Your questions about non-slip bath coating in Aberthin

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

What areas do you cover?

We work UK-wide. Prices don’t change with location.

How it works

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Have somewhere for us to park nearby if possible
  • Clear the area around the damage

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Get a free quote

Read more

When a repair isn’t the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Acrylic baths
  • Shower trays

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Why choose Surface Doctor in Aberthin

  • Free fixed quotes from pictures
  • Dust sheets down, tidy finish
  • We’ll tell you if it’s not worth repairing
  • No extra charge for your area

See our prices page.

Prices and what affects them

Quotes are free and the price is fixed. What we take into account:

  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • The material
  • Whether we combine several jobs

Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

When you take your pictures, a few simple things make all the difference:

  • Natural light rather than flash
  • Where you are, by postcode
  • Details of any past repairs
  • Any details about the material

For a price in Aberthin, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.