West Lothian · Scotland
Non-Slip Bath Coating in Adambrae
Non-slip bath coating across Adambrae and nearby, done in a single visit in most cases.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Adambrae without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We are often asked to fix resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, on enamelled baths, acrylic baths and shower trays.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Adambrae (EH54, EH55)
- County
- West Lothian
- Cover
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a few hours. Before we leave, we explain the curing time and the aftercare.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, usually overnight.
How to prepare
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Let us know which floor the room is on
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price.
Advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not where you live. The full price is agreed before you book.
What you get with us
- Straight answers about what a repair can do
- A year’s guarantee on all work
- We leave the room as we found it
- One price list for the entire UK
Take a look at our full price list.
FAQs for Adambrae
How much does non-slip bath coating cost in Adambrae?
Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item with your EH54 postcode.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
What do you need from me?
Photos of the damage, a photo of the whole bath or shower tray and your postcode. Then we’ll agree a date.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Do you come to Adambrae?
Yes, we do. Technicians travel to Adambrae from across the region, with no extra charge for travel.
Are there extra charges for Adambrae?
There is no separate call-out charge. The fixed quote covers the visit and the work.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
When a repair isn’t the answer
We will not take on work that will not last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
What non-slip bath coating costs
Each job gets its own fixed quote. This is what makes a difference:
- Unusual colours or finishes
- How many items we do on one visit
- Previous DIY repairs that have to come out
- Access to the area
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath or shower tray
- What it’s made of, if you know
- One sharp close-up of the damage
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say right away if a repair is the right fix.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Signs you need non-slip bath coating in Adambrae
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Signs it’s time to call us include:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
What to look for in a quote
- How your room will be protected
- How long it needs to cure
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
Where we work around Adambrae
Adambrae is about 2 miles south of Livingston, in West Lothian. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 58 places across West Lothian. We work right across the region, from Adambrae to Edinburgh (about 13 miles away).
Our visits in EH54 and EH55 work the same way as everywhere else we cover. You’ll find streets such as Calder Road, Newpark Road and Adambrae Road. We also cover the places around Adambrae: Bellsquarry (1 mile south), Dedridge (1 mile north-east), Murieston (1 mile east), Livingston Village (1 mile north) and Polbeth (1 mile south-west). Further out, we also cover Bathgate (5 miles north-west), Linlithgow (8 miles north-west), Whitburn (6 miles west), East Calder (3 miles north-east), Broxburn (5 miles north-east) and Armadale (7 miles west).
What’s near Adambrae
Typical jobs here are in homes near St. Margaret's Academy, Livingston Parish Church and Inveralmond Community High School and the streets around them. For rail, the closest station is Livingston South station, roughly 1 mile east. Well-known places in the area include Livingston Designer Outlet (0.8 miles north-east) and Bathgate Castle (4.3 miles west). Not far away are Dechmont Law.
Places near Adambrae
Also in Adambrae
About our accreditations · Every repair comes with a one-year guarantee.
