North Lanarkshire · Scotland

Non-Slip Bath Coating for Airbles homes

Non-slip bath coating in Airbles without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Airbles

What happens on the day

Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It typically takes a morning or an afternoon, and you are welcome to carry on with your day while we work.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Let us know if it has been repaired before
  • Tell us about parking, stairs or access

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a fixed price

Advice

How we handle non-slip bath coating in Airbles

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include safety for older or less mobile people and a bath or tray that is slippery when wet, on wet room floors (ask us), enamelled baths and shower trays.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Where
Airbles (ML1, ML3)
Area hub
North Lanarkshire
Cover
One year on every repair
Price
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What non-slip bath coating costs

Prices are worked out job by job, from your pictures. The main factors are:

  • How many areas need work
  • Unusual colours or finishes
  • Whether we combine several jobs
  • The material

We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • A picture taken from further back
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Landlords, agents and businesses in Airbles

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

FAQs for Airbles

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

How do I book?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Will I see the coating?

Very little: the treated area looks slightly matt.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

When a repair is not the answer

We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths

Where we work around Airbles

Airbles is about 1 mile south-west of Motherwell, in North Lanarkshire. Anywhere in ML1, we carry out the work at your property. Our repair technicians cover all 89 towns and villages across North Lanarkshire. Our nearest city page is Glasgow, about 12 miles away.

Jobs in ML1 and ML3 are booked in the same way as anywhere else. You will find streets such as Camp Road, Manse Road and Mason Lane, all of which we cover. We also travel to Motherwell (1 mile north-east), Muirhouse (1 mile south-east), Ravenscraig (1 mile north-east), Netherton (2 miles south-east) and Pather (3 miles east). Further out, we also cover Cumbernauld (12 miles north), Coatbridge (5 miles north), Airdrie (6 miles north), Bellshill (3 miles north-west), Kilsyth (14 miles north) and Burnfoot (6 miles north).

Landmarks near Airbles

Around Airbles, we work in homes near Duchess of Hamilton Park, Dalziel High School and Motherwell, among other places. Other local landmarks include Ladywell Primary School (0.7 miles north-west) and Public House (0.6 miles north). Airbles has its own railway station: Airbles station. Other landmarks nearby include Brandon Shopping Centre (0.5 miles north) and University Hospital Wishaw (2.1 miles east). Open spaces near Airbles include Strathclyde Loch and Baron's Haugh RSPB Reserve.

Map of Airbles © OpenStreetMap contributors

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Airbles customers choose us

  • Work done at your home or business
  • Same prices wherever you are
  • CHAS and Constructionline accredited
  • Most jobs done in one visit

Take a look at our full price list.

When to call us in Airbles

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

Questions to ask before booking

  • How long the guarantee is and what it covers
  • Whether there are any call-out or travel charges
  • How soon you can use it again
  • Whether the colour is mixed to match

How to compare quotes

Can I fix it myself?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.