Derbyshire · England
Non-Slip Bath Coating in Aldercar
We travel to Aldercar for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Non-slip bath coating in Aldercar, done in place
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Our technicians work on shower trays, enamelled baths and resurfaced baths, and people most often call us about resurfaced baths that are now too smooth and worn-out textured areas.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Aldercar (DE75, NG16)
- Region
- Derbyshire
- Cover
- One year on every repair
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about non-slip bath coating in Aldercar
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Can you quote from pictures?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Common problems we fix in Aldercar
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Clients usually contact us about:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
What your quote should include
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- Who will actually do the work
- Whether the colour is mixed to match
Should you replace it?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Why Aldercar customers choose us
- We leave the room as we found it
- Normally one visit, start to finish
- A year’s guarantee on all work
- Nothing taken out or refitted
Read our pricing.
How we price non-slip bath coating
We charge the same across the UK, including Aldercar. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
Getting ready for the visit
- Ensure the area is dry
- Let us know about parking or access
- Open a window if you can
Get a quote
Send us photos of the damage and one of the whole item, and tell us you are in Aldercar, and we’ll reply with a fixed quote.
Read more
Also near Aldercar
Other services in Aldercar
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we repair
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Resurfaced baths
Landlord and trade work in Aldercar
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Aldercar, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Covering Aldercar
Aldercar is about 1 mile south-east of Heanor, in Derbyshire. Customers in Aldercar get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Aldercar is one of 532 places in Derbyshire where we work. Our nearest city page is Birmingham, about 44 miles away.
Our visits in DE75 and NG16 work the same way as everywhere else we cover. Jobs here include addresses on Lee Lane, Mill Road and Breach Road and the roads around them. We also cover the places around Aldercar: Heanor (1 mile north-west), Langley Mill (1 mile north), Loscoe (2 miles north-west), Smalley (2 miles west) and Woodlinkin (2 miles north). Larger places within reach include Ilkeston (3 miles south-east), Long Eaton (8 miles south), Belper (6 miles west), Ripley (4 miles north-west), Bolsover (15 miles north) and Matlock (13 miles north-west).
Local landmarks in Aldercar
In Aldercar, that means homes near Marlpool Junior School, All Saints Church and Butchers Arms. The closest station to Aldercar is Langley Mill station, roughly 0.7 miles north-east. Further afield, we also cover the area around Codnor Castle (2.5 miles north) and Ilkeston Hospital (1.7 miles south-east).
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
