Gloucestershire · England
Non-slip bath & shower coating in Alderton, Gloucestershire
We travel to Alderton for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
About our non-slip bath coating in Alderton
The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. We are often asked to fix a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, on acrylic baths, shower trays and enamelled baths.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Alderton (GL20)
- Area hub
- Gloucestershire
- Warranty
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Landlord and trade work in Alderton
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Alderton, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
FAQs for Alderton
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your photos and we will quote them together.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
How much does non-slip bath coating cost in Alderton?
Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Places near Alderton
More services for Alderton
When we’d advise against a repair
It helps to know what we cannot do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Acrylic baths
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, normally overnight.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.
Read more
Covering Alderton
Alderton is about 4 miles north-east of Bishop's Cleeve, in Gloucestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Alderton is one of 470 towns and villages in Gloucestershire we cover. Our jobs stretch from Alderton to Birmingham (about 33 miles away).
Every address in GL20 is within our area, from the main roads to the quietest streets. Jobs here include addresses on St Margarets Road, Willow Bank Road and St Margarets Drive and the roads around them. We also cover the places around Alderton: Little Washbourne (1 mile west), Teddington (2 miles west), Woolstone (3 miles south-west), Gotherington (3 miles south-west) and Cleeve Hill (4 miles south). Within a short drive, we also cover Cheltenham (8 miles south-west), Gloucester (14 miles south-west), Tewkesbury (6 miles west), St Paul's (7 miles south-west), Lansdown (8 miles south-west) and Bishop's Cleeve (4 miles south-west).
Near you in Alderton
We visit homes around Oak Hill Church of England Primary School, Gardener's Arms and Church of St Margaret of Antioch, among other places. Alderton’s nearest station is Ashchurch for Tewkesbury station, about 4.6 miles west of the centre. Nearby you will also find Pebworth Rural District (2.4 miles east) and Winchcombe Castle (3.5 miles south-east). Not far away are Kemerton Lake and Nottingham Hill.
Why repair rather than replace?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- We come to you, anywhere in the UK
- One visit for most repairs
Read our prices page.
Prices and what affects them
You will know the full cost before you book. We look at:
- Whether we combine several jobs
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Access to the area
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- The material, if you know it
- A picture taken from further back
- Details of any past repairs
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
When to call us in Alderton
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Clients normally contact us about:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Before booking anyone
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- How long it needs to cure
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
