Cornwall · England

Non-slip bath & shower coating in Antron, Cornwall

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Antron. Free, fixed quotes from your pictures.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Antron?

Non-slip bath coating in Antron, done in place

It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, on shower trays, acrylic baths and wet room floors (ask us).

Whatever the size of the job, it’s backed by a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Where
Antron (TR10)
County
Cornwall
Cover
12 months on all our work
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

When a repair isn’t the answer

We will always be straight with you, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths

Our work in Antron

Antron is about 3 miles west of Falmouth, in Cornwall. From the centre of Antron to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 644 places in Cornwall.

Our visits in TR10 are booked in the same way as anywhere else. Other places close to Antron include Trenoweth (1 mile west), Mabe Burnthouse (1 mile north), Kernick (1 mile east), Longdowns (1 mile west) and Penryn (1 mile north-east). Further out, we also cover Truro (8 miles north-east), Falmouth (3 miles east), Camborne (8 miles north-west), Redruth (7 miles north-west), Helston (7 miles south-west) and Hayle (12 miles west).

Local landmarks in Antron

We visit homes around Mabe Community Primary School, Penryn College and St Laud's Church, among other places. Antron’s nearest station is Penryn station, roughly 1.3 miles north-east. Well-known places in the area include Falmouth Community Hospital (2.2 miles east) and Penryn Museum (1.5 miles east). The countryside around Antron includes Carnmenellis.

Map of Antron © OpenStreetMap contributors

How we price non-slip bath coating

We do not charge extra for travel to Antron. The price depends on:

  • Previous DIY repairs that have to come out
  • How easy the damage is to reach
  • Doing more than one item at once
  • The material

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Quotes from your photos

Good photos mean an accurate price. Here’s what helps:

  • A wider photo showing the whole bath or shower tray
  • A coin or ruler next to the damage for scale
  • Any earlier repairs or coatings
  • Any details about the material

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Antron: your questions answered

What happens after I send photos?

We review the photos and send a fixed quote and the next dates we have.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Do the materials smell?

There may be a mild smell during the work that clears as it cures.

Can I get a quote without a visit?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

Can landlords book you?

Yes, frequently. We can quote for several properties together and work between tenancies.

It’s been repaired before. Can you still fix it?

Yes, we often do. Removing the old work can add time, and that’s in the quote.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Work for landlords and builders

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Can I fix it myself?

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

What happens on the day

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a morning or an afternoon, tidy-up included.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, usually overnight.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings
  • Clear toiletries, mats and anything else from around the area

Get a quote

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Send pictures for a quote

Read more

Do you need non-slip bath coating in Antron?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Most people get in touch after spotting one of these:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • When it can be used again
  • What happens if the damage is worse than the photos show
  • Whether there are any call-out or travel charges
  • The length of the guarantee and what it covers

Our hiring checklist

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. We charge the same wherever you are, so there’s no premium for Antron. The job itself decides the price: the material, the amount of damage and how many items.

What you get with us

  • Straight answers about what a repair can do
  • CHAS, Constructionline and SafeContractor accredited
  • Fixed prices from your photos
  • We leave the room as we found it

Read our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.