Cheshire East · England
Non-Slip Bath Coating in Arclid
Fixed-price non-slip bath coating in Arclid and the surrounding area, done in a single visit in most cases.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
- Acrylic baths
- Shower trays
Non-slip bath coating in Arclid without replacing anything
The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include worn-out textured areas and resurfaced baths that are now too smooth, across resurfaced baths, shower trays and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Arclid (CW11)
- Region
- Cheshire East
- Cover
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and the room is left clean and tidy.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Getting a price
For a price in Arclid, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Our work in Arclid
Arclid is about 2 miles north-east of Sandbach, in Cheshire East. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Arclid is one of 254 places in Cheshire East where we work. Our jobs stretch from Arclid to Manchester (about 22 miles away).
Our visits in CW11 work the same way as everywhere else we cover. Streets in the area include Spark Lane, Sunnyside Walk and John Ford Way. Other places close to Arclid include Arclid Green (1 mile south-west), Illidge Green (1 mile north), Brownedge (1 mile north-west), Brickhouses (1 mile west) and Brereton Green (1 mile north-west). Within a short drive, we also cover Crewe (7 miles south-west), Macclesfield (10 miles north-east), Congleton (5 miles east), Wilmslow (12 miles north), Nantwich (10 miles south-west) and Knutsford (10 miles north).
Around Arclid
We visit homes around Sandbach School and St John the Evangelist's Church, among other places. The nearest railway station is Holmes Chapel station, roughly 3.2 miles north-west of the centre. The countryside around Arclid includes Astbury Mere and Brookhouse Moss.
Arclid questions
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Arclid as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What we’re called out for in Arclid
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Look out for these signs:
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Questions to ask before you book
- What aftercare is recommended
- Whether the colour is mixed to match
- How changes to the job are handled
- When it can be used again
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Typically one visit, start to finish
- We’ll tell you if it’s not worth repairing
- Fixed prices from your photos
- Nothing taken out or refitted
Read our prices page.
Also in Arclid
How we price non-slip bath coating
You will not pay by the hour. The price is based on:
- Whether we combine several jobs
- The type of damage
- The material and finish
- Whether old repairs or coatings need taking off
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job.
About our accreditations · Every repair comes with a one-year guarantee.
