Hertfordshire · England

Non-Slip Bath Coating for Astrope homes

Non-slip bath coating in Astrope without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Astrope

How we price non-slip bath coating

There’s no area surcharge for Astrope. What changes the price is:

  • Whether we combine several jobs
  • The material and finish
  • What kind of damage it is
  • How many areas need work

We charge the same wherever you are, so there is no premium for Astrope. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed quote

Most quotes are done from photos alone. To make it quick:

  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • A wider photo showing the whole bath or shower tray
  • One sharp close-up of the damage

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price without visiting.

Non-slip bath coating in Astrope without replacing anything

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We work on acrylic baths, shower trays and wet room floors (ask us), and common reasons people get in touch are worn-out textured areas and a bath or tray that is slippery when wet.

You get a one-year guarantee, the same in Astrope as everywhere else we work. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Area
Astrope (HP23)
Region
Hertfordshire
Cover
12 months on all our work
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Astrope, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

FAQs for Astrope

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

What do you need from me?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Is repairing better than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

About Astrope

Astrope is about 5 miles east of Aylesbury, in Hertfordshire. Whether you’re in the middle of Astrope or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 381 places in Hertfordshire. Our nearest city page is London, about 35 miles away.

We work across HP23. If you are just outside Astrope, we cover Puttenham (1 mile west), Long Marston (1 mile north), Buckland (2 miles south), Aston Clinton (2 miles south-west) and Broughton (3 miles west). Larger places within reach include Hemel Hempstead (12 miles south-east), Harpenden (15 miles east), Berkhamsted (7 miles south-east), Tring (3 miles south-east), Chorleywood (15 miles south-east) and Grovehill (11 miles south-east).

Around Astrope

Locally, our jobs take us to homes close to Church of St Mary (Church of England), The Half Moon Public House and Long Marston VA Church of England Primary School and the streets around them. The nearest railway station is Cheddington station, roughly 2.9 miles north-east of the centre. A little further out are Tindal Centre (4.2 miles west) and Pitstone Green Museum (2.8 miles east). Not far away are Haddington Hill and College Lake nature reserve.

Map of Astrope © OpenStreetMap contributors

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

Materials we repair

  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
  • Acrylic baths

The process

The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, usually overnight.

Before we arrive

  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat

How to get a price

For a price in Astrope, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Send photos for a quote

Related advice

What we are called out for in Astrope

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas

Before you book anyone

  • What preparation is included
  • How to care for the finish
  • A fixed price, and whether VAT is included
  • How the room is protected while they work

Our hiring checklist

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Why book with us

  • We will tell you if it’s not worth repairing
  • A year’s guarantee on all work
  • Usually one visit, start to finish
  • Technicians who travel to you, UK-wide

See our prices page.

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.