Derbyshire · England
Non-Slip Bath Coating for Atlow homes
Fixed-price non-slip bath coating in Atlow and the surrounding area, done in a single visit in most cases.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Our work in Atlow
Atlow is about 7 miles west of Belper, in Derbyshire. Whether you’re in the middle of Atlow or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 532 towns and villages in Derbyshire, from the larger towns to small villages. We work right across the region, from Atlow to Manchester (about 39 miles away).
All of DE6 is within our area. Close by, we cover Hulland (1 mile south-east), Upper Biggin (1 mile east), Hulland Ward (1 mile south-east), Hognaston (1 mile north) and Bradley (2 miles south-west). We also work in nearby towns such as Ilkeston (15 miles east), Belper (7 miles east), Heanor (12 miles east), Ripley (10 miles east), Langley Mill (13 miles east) and Matlock (9 miles north-east).
What’s near Atlow
Our customers here include homes close to Church of St Phillip and St James, among other places. A little further out are St Oswalds Hospital (4 miles west) and Hamilton House Toy Museum (3.7 miles west). For a walk, there is Harboro' Rocks.
Non-slip bath coating in Atlow without replacing anything
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Typical jobs include resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, on resurfaced baths, wet room floors (ask us) and shower trays.
Every job is backed for twelve months in Atlow and everywhere else. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Atlow (DE6)
- County
- Derbyshire
- Guarantee
- One year on every repair
- Quotes
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, typically overnight.
Before we arrive
- Ensure the area is dry
- Clear the area around the damage
- Ensure the room can be ventilated
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Also in Atlow
What affects the price in Atlow
Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The size and number of damaged areas
- The material
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
Two or three clear photos are generally enough. Try to include:
- Any earlier repairs or coatings
- Where you are, by postcode
- A coin beside the damage so we can judge size
- One picture of the entire bath or shower tray
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
What a repair cannot fix
Before booking, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Resurfaced baths
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- Honest advice, even when it means no job
- We leave the room as we found it
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
Take a look at our prices page.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Common problems we fix in Atlow
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The things customers normally mention when they call include:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
What to look for in a quote
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- What happens if they find more damage
- Whether there are any call-out or travel charges
FAQs for Atlow
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Do you cover the entire of Derbyshire?
Across the UK, so Atlow is covered. Prices don’t change with location.
What happens once I’ve sent photos?
We review the photos and send a fixed quote.
How do I get a price for non-slip bath coating in Atlow?
We give a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
About our accreditations · Every repair comes with a one-year guarantee.
