North Lanarkshire · Scotland

Non-slip bath & shower coating in Balloch, North Lanarkshire

Clear non-slip coatings for baths and shower trays for homes and businesses in Balloch and across North Lanarkshire. Free, fixed quotes from your pictures.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Balloch homes

Non-slip bath coating at your home in Balloch

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Whether it’s safety for older or less mobile people and resurfaced baths that are now too smooth, we can help, whatever the material.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Where
Balloch (G68)
Region
North Lanarkshire
Guarantee
One year on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays

How it works

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to look after it.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price.

Get a free quote

Related advice

Common problems we fix in Balloch

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

You may need us if you’ve spotted:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas

Questions to ask before booking

  • Is the price fixed, and does it include VAT?
  • If travel is included in the price
  • When it can be used again
  • What happens if they find more damage

How to compare quotes

FAQs for Balloch

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Do you work in Balloch?

Yes, we do. We send a technician to Balloch for every job, and the price is the same as everywhere else.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

What areas do you cover?

The entire UK, including all of North Lanarkshire. Just include your postcode and we will offer you dates.

Balloch and nearby

Balloch is about 1 mile west of Cumbernauld, in North Lanarkshire. We visit customers in Balloch and the surrounding area, so nothing has to leave your home. Balloch is one of 89 places in North Lanarkshire we cover. Our nearest city page is Glasgow, about 12 miles away.

Jobs in G68 work the same way as everywhere else we cover. We regularly work on streets such as Cowan Road, Balloch Road and Dunbrach Road and the roads around them. Nearby, we also work in Smithstone (1 mile west), Craigmarloch (1 mile north), Ravenswood (1 mile south-east), Croy (1 mile north-west) and Condorrat (1 mile south). We also work in nearby towns such as Motherwell (11 miles south), Coatbridge (7 miles south), Airdrie (6 miles south), Wishaw (13 miles south), Bellshill (9 miles south) and Burnfoot (6 miles south).

Near you in Balloch

Locally, our jobs take us to homes close to Our Lady's High and Croy, among other places. The nearest railway station is Croy station, roughly 0.6 miles north-west. Nearby you’ll also find Antonine Centre (1.3 miles east) and Cumbernauld Museum (1.3 miles east). Green spaces nearby include Antermony Loch and Bar Hill.

Map of Balloch © OpenStreetMap contributors

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Balloch as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why us?

  • Dust sheets down, tidy finish
  • One-year guarantee on every repair
  • Straight answers about what a repair can do
  • Work done at your home or business

See our pricing.

What affects the price in Balloch

There are no hourly rates or hidden extras. The price depends on:

  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • Unusual colours or finishes
  • Whether we combine several jobs

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Two or three clear pictures are usually enough. Try to include:

  • Natural light rather than flash
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale
  • One picture of the entire bath or shower tray

For a price in Balloch, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.