Shetland Islands · Scotland

Non-Slip Bath Coating in Baltasound

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Baltasound. Send photos for a free, fixed quote.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Baltasound

The process

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Mention any parking restrictions or tricky access
  • Clear toiletries, mats and anything else from around the area

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Get a fixed price

Read more

How we handle non-slip bath coating in Baltasound

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include a bath or tray that is slippery when wet and worn-out textured areas, across resurfaced baths, shower trays and enamelled baths.

Every job is backed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Where
Baltasound (ZE2)
Area hub
Shetland Islands
Guarantee
12 months on all our work
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Can I fix it myself?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

Landlord and trade work in Baltasound

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

If you manage property in Baltasound, we will quote for several properties at once. Send photos for each one and we will price them together.

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price depends on:

  • How many items we do on one visit
  • How many areas need work
  • The material and finish
  • What kind of damage it is

Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

Two or three clear photos are normally enough. It helps if you send:

  • Any details about the material
  • Whether it’s been repaired or coated before
  • Natural light rather than flash
  • A coin beside the damage so we can judge size

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.

Our work in Baltasound

Baltasound is in the Shetland Islands. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We cover 63 places across the Shetland Islands, from the larger towns to small villages.

Every address in ZE2 is covered, from the main roads to the quietest streets. We regularly work on streets such as Setters Hill Estate, Curlew Avenue and Cormorant Way and the roads around them. Nearby, we also work in Haroldswick (3 miles north-east), Clivocast (6 miles south), Cullivoe (6 miles south-west), Houbie (11 miles south) and Camb (12 miles south-west). Baltasound is one of the larger places we cover in the Shetland Islands. For island and remote addresses, call first so we can plan the visit.

Local landmarks in Baltasound

In Baltasound, that means homes near Kirkhoull and Baltasound Junior High School, among other places. A little further out are Unst Boat Haven (2.1 miles north-east). Open spaces near Baltasound include Loch of Beiton and Muckle Heog.

Map of Baltasound © OpenStreetMap contributors

When a repair isn’t the answer

A repair isn’t right for every job, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

What we work on

  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Resurfaced baths

Questions from Baltasound

How much does non-slip bath coating cost in Baltasound?

Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your ZE2 postcode.

Can I get a quote without a visit?

In nearly every case. If pictures don’t show enough, we will ask for another angle.

How do I book?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Is repairing better than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Do you work in Baltasound?

Yes. We work across the UK and travel to Baltasound. Send pictures and we will quote, or call 0345 017 0787.

Repairing versus replacing in Baltasound

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why us?

  • Nothing taken out or refitted
  • A year’s guarantee on all work
  • No extra charge for your area
  • Straight answers about what a repair can do

See our full price list.

Signs you need non-slip bath coating in Baltasound

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

You may need us if you’ve spotted:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas

Questions to ask before booking

  • A fixed price, and whether VAT is included
  • Whether they match the colour on site
  • How changes to the job are handled
  • Whether a trained technician does the job

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.