Surrey · England
Non-slip bath & shower coating in Barford, Surrey
Our repair technicians come to Barford for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Non-slip bath coating in Barford, done in place
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We’re often asked to fix a bath or tray that is slippery when wet and worn-out textured areas, on resurfaced baths, shower trays and enamelled baths.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Barford (GU10, GU26)
- County
- Surrey
- Guarantee
- A year, on every repair
- Quotes
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Barford
Barford is about 4 miles east of Bordon, in Surrey. We visit homes and businesses in Barford and the surrounding area, so you do not need to take anything anywhere. We work in all 395 towns and villages across Surrey. We work right across the region, from Barford to London (39 miles away).
Postcode districts we cover here: GU10 and GU26. Whether you live on Churt Road, Kitts Lane and Hammer Lane or a nearby road, we can come to you. Close by, we cover Whitmoor Vale (1 mile south-east), Churt (1 mile north), Green Cross (1 mile north-east), Beacon Hill (1 mile east) and Crosswater (1 mile north). Further out, we also cover Guildford (12 miles north-east), Camberley (14 miles north), Farnham (6 miles north), Frimley (13 miles north), Haslemere (4 miles south-east) and Cranleigh (13 miles east).
Local landmarks in Barford
We visit homes around Crossways Inn, St John's CofE Aided Infant School and The Flashes. Barford’s nearest station is Haslemere station, roughly 3.9 miles south-east of the centre. A little further out are Chase Community Hospital (3.8 miles south-west). Green spaces nearby include Gibbet Hill and Upper Lake.
Landlords, agents and businesses in Barford
Landlords, letting agents and housing providers in Barford use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Repairing versus replacing in Barford
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why book with us
- Normally one visit, start to finish
- We will tell you if it’s not worth repairing
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
Read our prices page.
What non-slip bath coating costs
We give every job a fixed price from photos. This is what makes a difference:
- The size and number of damaged areas
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- What kind of damage it is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- The material, if you know it
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job the same day in most cases.
Also near Barford
Also in Barford
When to call us in Barford
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Contact us if you’ve noticed:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Comparing quotes
- Who turns up on the day
- How changes to the job are handled
- How the colour is matched
- How soon you can use it again
What we cannot put right
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Barford
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
Barford: your questions answered
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you repair something that is been repaired before?
Generally, yes. The old repair comes out first, so mention it when you send photos.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What happens after I send pictures?
You’ll get a fixed quote back. You are under no obligation.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How do I get a price for non-slip bath coating in Barford?
Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How the visit works
Arrival times are agreed in advance. On site, it takes a few hours for most jobs. We leave the room clean.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
