Derbyshire · England
Non-slip bath & shower coating in Bargate, Derbyshire
Clear non-slip coatings for baths and shower trays in Bargate, carried out at your home and guaranteed for a year.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Signs you need non-slip bath coating in Bargate
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Send us a picture if you notice any of these:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
What to look for in a quote
- What protection goes down before work starts
- When it can be used again
- How changes to the job are handled
- A fixed quote, and whether VAT is included
How we handle non-slip bath coating in Bargate
It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. We regularly repair wet room floors (ask us), resurfaced baths and shower trays, and the jobs we see most are a bath or tray that is slippery when wet and resurfaced baths that are now too smooth.
You get a one-year guarantee, the same in Bargate as everywhere else we work. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Bargate (DE56)
- County
- Derbyshire
- Warranty
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Questions from Bargate
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
How do I get a price for non-slip bath coating in Bargate?
The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
What happens next?
We come back with a fixed quote, normally with dates to choose from. You are under no obligation.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
Repairing versus replacing in Bargate
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.
What you get with us
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- Nothing taken out or refitted
- Fixed prices from your photos
Take a look at our pricing.
Also near Bargate
Other services in Bargate
How the visit works
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
Getting ready for the visit
- Let us know if it has been repaired before
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Our work in Bargate
Bargate is about 1 mile south of Belper, in Derbyshire. Whether you’re in the middle of Bargate or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Bargate is one of 532 towns and villages in Derbyshire where we work. Our jobs stretch from Bargate to Birmingham (about 42 miles away).
Postcode districts we cover here: DE56. Streets in the area include Haslam Place, Highwood Avenue and Bargate Road. Close by, we cover Cinderhill (1 mile east), Holbrook (1 mile south), Milford (1 mile south-west), Rawson Green (1 mile east) and Belper (1 mile north). Larger places within reach include Ilkeston (7 miles south-east), Long Eaton (11 miles south-east), Heanor (5 miles east), Ripley (3 miles north-east), Langley Mill (5 miles east) and Matlock (10 miles north-west).
Near you in Bargate
In Bargate, that means homes near Herbert Strutt Primary School, White Hart Public House and St Swithun, among other places. Nearby too are Belper School and Sixth Form Centre (0.9 miles north) and Rowen House School (0.7 miles west). The closest station to Bargate is Belper station, about 1.1 miles north-west of the centre. Other landmarks nearby include Babington Hospital (1 mile west) and Duffield Castle (1.9 miles south-west). Open spaces near Bargate include Wyver Lane Nature Reserve and Alport Height.
- Local facilities include Belper Urban District (1.2 miles north-west)
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair won’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly.
Materials we repair
- Resurfaced baths
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
- Enamelled baths
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What affects the price in Bargate
We do not charge extra for travel to Bargate. The price depends on:
- How easy the damage is to reach
- How many items we do on one visit
- Unusual colours or finishes
- The type of damage
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- A wider photo showing the whole bath or shower tray
- What it’s made of, if you know
- A clear, close picture of the problem area
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
