Greater London · England
Non-slip bath & shower coating in Barking, Greater London
Clear non-slip coatings for baths and shower trays for homes and businesses in Barking and across Greater London. Free, fixed quotes from your pictures.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas

Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Non-slip bath coating in Barking, done in place
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. We work on shower trays, resurfaced baths and enamelled baths, and the jobs we see most are worn-out textured areas and bath mats that harbour mould or get forgotten.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Barking (IG11, RM9, RM8, E6)
- Area hub
- Greater London
- Warranty
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

Do you need non-slip bath coating in Barking?
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
These are the problems we’re asked about most:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Before you book anyone
- Who will actually do the work
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- How the colour is matched
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
Repairing versus replacing in Barking
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not your postcode. You will see the full price before you book.
Why choose Surface Doctor in Barking
- Dust sheets down, tidy finish
- Work done at your home or business
- Honest advice, even when it means no job
- Nothing taken out or refitted
Read our pricing.
Other services in Barking
Landlords, agents and businesses in Barking
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs in Greater London and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How we price non-slip bath coating
You won’t pay by the hour. The price is based on:
- Doing more than one item at once
- Access to the area
- The material and finish
- Previous DIY repairs that have to come out
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send photos for a quote
When you take your photos, a few simple things make all the difference:
- Your postcode, so we can check dates
- Details of any past repairs
- The material, if you know it
- A picture taken from further back
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Where we work around Barking
Barking is about 9 miles east of London, in Greater London. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Barking is one of 764 towns and villages in Greater London where we work. Our jobs stretch from Barking to London (about 9 miles away).
We work across IG11, RM9, RM8 and E6 and the streets around it. Local streets include Eastbury Square, London Road and Church Road, all of which we cover. Nearby, we also work in Loxford (1 mile north-west), Creekmouth (1 mile south), Wallend (1 mile west), East Ham (2 miles west) and Beckton (2 miles south-west). Within a short drive, we also cover London (9 miles west), City of Westminster (11 miles west), Marylebone (11 miles west), Kensington (13 miles west), St Pancras (9 miles west) and Shoreditch (8 miles west).
Around Barking
Typical jobs here are in homes near St Patrick's Church, Mayesbrook Park and Eastbury Primary School. Nearby too are The Barking Dog pub (0.8 miles north-west) and Greatfields School (0.5 miles west). For rail, the closest station is Barking station, about 0.8 miles north-west of the centre. Nearby you will also find Barking Community Hospital (under half a mile north) and East End Women's Museum (0.9 miles west). Not far away are Ripple Nature Reserve and Hollow Pond.
- Other local spots include East Ham (1.8 miles west)
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, typically overnight.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Getting a price
Email us a picture of the damage and a wider shot of the whole item, and tell us you are in Barking, and we will come back with a fixed quote.
Related advice
Your questions about non-slip bath coating in Barking
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
About our accreditations · Every repair comes with a one-year guarantee.

