Essex · England

Non-slip bath & shower coating in Barnston, Essex

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Barnston. Free, fixed quotes from your photos.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Barnston

Non-slip bath coating in Barnston, done in place

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We’re frequently asked to fix a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, on acrylic baths, shower trays and wet room floors (ask us).

Big or small, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Area
Barnston (CM6)
County
Essex
Guarantee
One year on every repair
Price
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Landlords, agents and businesses in Barnston

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Common problems we fix in Barnston

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Clients usually contact us about:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • Whether there are any call-out or travel charges
  • What the guarantee covers, and for how long
  • When it can be used again

Choosing a repair company

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Shower trays

Barnston: your questions answered

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Can you redo someone else’s repair?

Yes, we often do. It can add a little time, which we include in the quote.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is there any odour?

It depends on the job, but often a little. Ventilation keeps it to a minimum.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

What we do, step by step

There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours, tidy-up included.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, generally overnight.

How to prepare

  • Open a window if you can
  • Tell us about any previous repairs or coatings
  • Move bottles, mats and clutter away from the area

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a fixed price

Advice

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Prices and what affects them

You won’t pay by the hour. The price is based on:

  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • The colour and finish to match
  • Where the damage is and how we get to it

The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before
  • Where you are, by postcode

For a price in Barnston, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Why Barnston clients choose us

  • Most jobs done in one visit
  • Straight answers about what a repair can do
  • Rooms protected and left tidy
  • CHAS and Constructionline accredited

Take a look at our prices page.

Our work in Barnston

Barnston is about 8 miles west of Braintree, in Essex. Across the CM6 area, we carry out the work at your property. Barnston is one of 644 towns and villages in Essex we cover. You can also see our page for London, about 32 miles away.

Every address in CM6 is within our area, from the main roads to the quietest streets. Whether you live on Mill Field, Hylands Close and Berners End or a nearby road, we can come to you. Neighbouring places we cover include Great Dunmow (2 miles north-west), Church End (2 miles north-west), High Roding (3 miles south-west), Stagden Cross (3 miles south) and Great Canfield (3 miles south-west). Within a short drive, we also cover Chelmsford (9 miles south-east), Braintree (8 miles east), Harlow (13 miles south-west), Maldon (15 miles south-east), Witham (11 miles east) and Saffron Walden (13 miles north-west).

Local landmarks in Barnston

We visit homes around Helena Romanes School and Sixth Form Centre and Church of St Andrew and the streets around them. A little further out are Little Easton Moat (3.3 miles north-west). The countryside around Barnston includes Phyllis Currie Nature Reserve.

Map of Barnston © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.