County Durham · England
Non-Slip Bath Coating in Beamish
Non-slip bath coating in and around Beamish: photo quotes, tidy work and a year’s guarantee.
- Safety for older or less mobile people
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Honest limits
We’d rather lose a job than do one that won’t last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
Non-slip bath coating in Beamish, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We’re frequently asked to fix safety for older or less mobile people and resurfaced baths that are now too smooth, in resurfaced baths, acrylic baths and enamelled baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Beamish (DH9)
- County
- County Durham
- Guarantee
- A year, on every repair
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlord and trade work in Beamish
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why book with us
- No extra charge for your area
- We leave the room as we found it
- Honest advice, even when it means no job
- Fixed prices from your pictures
Read our prices page.
Your questions about non-slip bath coating in Beamish
Do you work in Beamish?
We do. We send a technician to Beamish for every job, with no extra charge for travel.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Do you cover the entire of County Durham?
All of County Durham, and the rest of the UK. Travel is included in the price.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Related advice
Our work in Beamish
Beamish is about 2 miles east of Stanley, in County Durham. Wherever you are in the DH9 postcode area, we carry out the work at your property. Beamish is one of 329 towns and villages in County Durham we cover. Our jobs stretch from Beamish to Newcastle upon Tyne (about 8 miles away).
Here we cover the DH9 postcode area. Jobs here include addresses on Station Road, Peggy's Wicket and Birchwood Close. Neighbouring places we cover include High Forge (1 mile north), West Pelton (1 mile south-east), No Place (1 mile west), High Handenhold (1 mile east) and High Urpeth (1 mile east). We also work in nearby towns such as Durham (7 miles south-east), Consett (8 miles west), Spennymoor (12 miles south), Seaham (12 miles east), Chester-le-Street (3 miles south-east) and Peterlee (15 miles south-east).
Around Beamish
Typical jobs here are in homes near The Shepherd & Shepherdess pub, Roseberry College and West Pelton Primary School, among other places. For rail, the closest station is Chester-Le-Street station, about 3.2 miles south-east. Further afield, we also cover the area around Lambton Castle (4.5 miles east) and Chester Le Street Hospital (3.4 miles south-east).
Prices and what affects them
We price every job individually. The main factors are:
- How easy the damage is to reach
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- Where you are, by postcode
- One picture of the entire bath or shower tray
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
What we are called out for in Beamish
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- Safety for older or less mobile people
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
What to look for in a quote
- How long it needs to cure
- What prep work is covered
- What happens if they find more damage
- A fixed price, and whether VAT is included
Nearby places to Beamish
Also in Beamish
About our accreditations · Every repair comes with a one-year guarantee.
