North Lincolnshire · England
Non-slip bath & shower coating in Belton, North Lincolnshire
Clear non-slip coatings for baths and shower trays at your home in Belton, with a one-year guarantee on every repair.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Should you replace it?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- A year’s guarantee on all work
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page.
About our non-slip bath coating in Belton
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you are dealing with bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can generally put it right.
We stand behind the work with a one-year guarantee, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Belton (DN9, DN8)
- Region
- North Lincolnshire
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Belton
More services for Belton
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Belton
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
Landlord and trade work in Belton
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What non-slip bath coating costs
A fixed quote means you know the cost before you book. We take into account:
- How much damage there is
- The type of damage
- Whether we combine several jobs
- The material and finish
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with nothing added on the day.
How to get a fixed quote
You can typically get a fixed quote without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Any details about the material
- Good light, ideally daylight, without flash glare
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Signs you need non-slip bath coating in Belton
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Before booking anyone
- What happens if they find more damage
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
Our work in Belton
Belton is about 7 miles west of Scunthorpe, in North Lincolnshire. Whether you are in the middle of Belton or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 90 places in North Lincolnshire, from the larger towns to small villages. Our jobs stretch from Belton to Leeds (about 35 miles away).
All of DN9 and DN8 is within our area, from the main roads to the quietest streets. From High Street, Ashtree Close and Aldam Drive or anywhere nearby, a technician can come to you. With the A161 close by, Belton is simple for us to get to. Neighbouring places we cover include Bracon (1 mile south), Woodhouse (1 mile north), Westgate (1 mile west), Stockholes Turbary (1 mile west) and Epworth (2 miles south). We also work in nearby towns such as Scunthorpe (7 miles east), Bottesford (6 miles east), Brigg (14 miles east), Frodingham (7 miles north-east), Crosby (7 miles north-east) and Broughton (11 miles east).
What’s near Belton
We visit homes around The Wheatsheaf pub, Church of All Saints and Belton All Saints CofE Primary School and the streets around them. For rail, the closest station is Crowle station, roughly 2.5 miles north. A little further out are Haywain Farm Museum (1.6 miles south-west).
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How it works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and let you know when you can use it again.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Advice
FAQs for Belton
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
How much does non-slip bath coating cost in Belton?
The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
What happens next?
We come back with a fixed quote, plus dates. There is no obligation to book.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
About our accreditations · Every repair comes with a one-year guarantee.
