Greater London · England
Non-Slip Bath Coating for Belvedere homes
Our technicians come to Belvedere for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Belvedere and nearby
Belvedere is about 3 miles east of Plumstead, in Greater London. Wherever you are in the DA17 postcode area, a technician comes to you. We work in 764 places across Greater London. You can also see our page for London, about 11 miles away.
Postcode districts we cover here: DA17, DA8 and DA18. You will find streets such as Cray Road, Adit Road and Clive Road. Neighbouring places we cover include Lessness Heath (1 mile west), Erith (1 mile south-east), Northumberland Heath (1 mile south-east), Bexley Riverside (1 mile south-east) and West Heath (1 mile south-west). Within a short drive, we also cover London (11 miles west), City of Westminster (13 miles west), Marylebone (13 miles west), Kensington (15 miles west), St Pancras (12 miles west) and Shoreditch (10 miles west).
Local landmarks in Belvedere
In Belvedere, that means homes near Trinity Church of England School, Parish Church of All Saints and Trinity School and the streets around them. Also close by are Lesnes Abbey Woods (1.1 miles west), Priory Club pub (less than half a mile west) and Lessness Heath Primary School (under half a mile south-west). The closest station to Belvedere is Belvedere station, roughly 0.5 miles north. Nearby you will also find Colyers (1.3 miles south-east) and Erith and District Hospital (0.8 miles south-east). The countryside around Belvedere includes Crossness Nature Reserve.
Non-slip bath coating in Belvedere, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We work on resurfaced baths, enamelled baths and shower trays, and common reasons people contact us are bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.
Whatever the size of the job, you get the same one-year guarantee in Belvedere and across Greater London. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Belvedere (DA17, DA8, DA18)
- County
- Greater London
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Belvedere
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Get in touch if you’ve noticed any of these:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Before booking anyone
- What the guarantee covers, and for how long
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- What preparation is included
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Open a window if you can
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed quote.
Read more
Repairing versus replacing in Belvedere
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Honest advice, even when it means no job
- Nothing taken out or refitted
- Same prices wherever you are
- Work done at your home or business
Take a look at our full price list.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Places near Belvedere
What else we do in Belvedere
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Prices and what affects them
There’s no area surcharge for Belvedere. What changes the price is:
- How hard the colour is to match
- Any earlier repairs that need removing first
- The material
- How many areas need work
The price reflects the work involved, not where you live. You’ll see the full price before you book.
Quotes from your pictures
When you take your pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- One picture of the whole bath or shower tray
- Where you are, by postcode
- Any details about the material
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
When a repair is not the answer
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Wet room floors (ask us)
- Acrylic baths
- Resurfaced baths
- Enamelled baths
- Shower trays
Your questions about non-slip bath coating in Belvedere
Which areas do you work in?
We work UK-wide, so Belvedere is covered. Prices do not change with location.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What happens after I send pictures?
We review the photos and send a fixed quote and the next dates we have.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
How do I get a price for non-slip bath coating in Belvedere?
We give a fixed price from your photos. Send a close-up and a picture of the whole item and your postcode.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
About our accreditations · Every repair comes with a one-year guarantee.
