Perth and Kinross · Scotland

Non-Slip Bath Coating in Blair Atholl

We travel to Blair Atholl for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Blair Atholl homes

What we can’t put right

We would rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Enamelled baths

Non-slip bath coating in Blair Atholl, done in place

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We are often asked to fix resurfaced baths that are now too smooth and worn-out textured areas, in wet room floors (ask us), shower trays and enamelled baths.

Every job is backed for twelve months. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Blair Atholl (PH18)
Area hub
Perth and Kinross
Guarantee
12 months on all our work
Price
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Landlord and trade work in Blair Atholl

Landlords, letting agents and housing providers in Blair Atholl use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Can I fix it myself?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Repair or replace in Blair Atholl?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • Every repair guaranteed for a year
  • We will tell you if it’s not worth repairing
  • One price list for the entire UK
  • Dust sheets down, tidy finish

Take a look at our pricing.

Do you need non-slip bath coating in Blair Atholl?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Common reasons people in Blair Atholl contact us are:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

Questions to ask before you book

  • How soon you can use it again
  • What protection goes down before work starts
  • Whether there are any call-out or travel charges
  • Whether they match the colour on site

How to compare quotes

What affects the price in Blair Atholl

There is no area surcharge for Blair Atholl. The price reflects:

  • How easy the damage is to reach
  • Unusual colours or finishes
  • The material
  • What kind of damage it is

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Send pictures for a quote

When you take your pictures, a few simple things make all the difference:

  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Your questions about non-slip bath coating in Blair Atholl

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Is a repair better than a new one?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

It’s been repaired before. Can you still fix it?

Yes, we often do. It can add a little time, which we include in the quote.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Just add the extra items to your pictures and you’ll get one combined price.

Is my repair covered?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Blair Atholl and the surrounding area

Blair Atholl is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Whether you’re in the middle of Blair Atholl or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Blair Atholl is one of 107 places in Perth and Kinross where we work. You can also see our page for Edinburgh, about 62 miles away.

Postcode districts we cover here: PH18. We regularly work on streets such as The Square, Invertilt Road and The Lane. Blair Atholl is on the B8079, so it’s easy for us to reach. Neighbouring places we cover include Bridge of Tilt (1 mile north), Old Blair (1 mile west), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (6 miles south-east). For island and remote addresses, call first so we can plan the visit.

Near you in Blair Atholl

We visit homes around Bridge Of Tilt. There is a railway station in Blair Atholl itself: Blair Atholl station. Other landmarks nearby include Atholl Country Life Museum (within half a mile west) and Blair Castle (0.9 miles north-west). The countryside around Blair Atholl includes Creag Odhar and Loch Moraig.

Map of Blair Atholl © OpenStreetMap contributors

The process

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours in most cases. The room is left tidy.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Ensure the room can be ventilated
  • Move bottles, mats and clutter away from the area

Ask for a price

Most customers in Blair Atholl get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.