Kent · England
Non-Slip Bath Coating in Blean
Fixed-price non-slip bath coating in Blean and the surrounding area, done in a single visit in most cases.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
How we handle non-slip bath coating in Blean
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We’re often asked to fix worn-out textured areas and resurfaced baths that are now too smooth, in acrylic baths, enamelled baths and wet room floors (ask us).
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Blean (CT2)
- Area hub
- Kent
- Cover
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Blean
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
How much does non-slip bath coating cost in Blean?
The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- We will tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- A fixed quote before booking
Read our prices page.
Prices and what affects them
There’s no area surcharge for Blean. The price reflects:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How easy the damage is to reach
- The material and finish
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed quote
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath or shower tray
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
What we’re called out for in Blean
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Send us a picture if you notice any of these:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Comparing quotes
- Who will actually do the work
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
Covering Blean
Blean is about 3 miles north-west of Canterbury, in Kent. Across the CT2 area, we carry out the work at your property. We cover 922 places across Kent. Our jobs stretch from Blean to London (51 miles away).
Every address in CT2 is within our area. Whether you live on Westfield, School Lane and Vicarage Lane or a nearby road, we can come to you. You’ll find Blean on the A290, which makes it straightforward to reach. Close by, we cover Honey Hill (1 mile north-west), Tyler Hill (1 mile east), Denstroude (1 mile north-west), Hackington (1 mile east) and Yorkletts (2 miles north-west). Within a short drive, we also cover Ashford (14 miles south-west), Canterbury (3 miles south-east), Sittingbourne (14 miles west), Whitstable (3 miles north), Faversham (7 miles west) and Herne Bay (6 miles north-east).
What’s near Blean
Locally, our jobs take us to homes close to Blean Primary School, Church of St Cosmus and St Damian and Tyler Hill Meadow. You’ll also find The Archbishop's School (1.6 miles south-east) and St Edmund's School (1.3 miles south-east). The closest station to Blean is Canterbury West station, about 2.1 miles south-east of the centre. Further afield, we also cover the area around Sidney Cooper Museum (2.3 miles south-east) and Eastbridge Hospital of St Thomas the Martyr (2.4 miles south-east). Open spaces near Blean include Blean Woods RSPB Reserve.
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Blean
- Acrylic baths
- Resurfaced baths
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Have a window or extractor fan available
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Nearby places to Blean
More services for Blean
About our accreditations · Every repair comes with a one-year guarantee.
