Nottinghamshire · England
Non-slip bath & shower coating in Bolham, Nottinghamshire
We travel to Bolham for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Prices and what affects them
Every quote is fixed and free. What we take into account:
- Doing more than one item at once
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
Phone photos are fine. Make sure they show:
- What it’s made of, if you know
- Where you are, by postcode
- Details of any past repairs
- A close-up of the damage, in focus
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you are under no obligation.
About our non-slip bath coating in Bolham
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We regularly repair wet room floors (ask us), acrylic baths and resurfaced baths, and the jobs we see most are safety for older or less mobile people and resurfaced baths that are now too smooth.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Bolham (DN22)
- Region
- Nottinghamshire
- Guarantee
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
Preparing for the visit
- Clear the area around the damage
- Let the surface dry out before the visit
- Open a window if you can
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Your questions about non-slip bath coating in Bolham
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
How much does non-slip bath coating cost in Bolham?
We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your DN22 postcode.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
When a repair is not the answer
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before you book.
What we work on
- Resurfaced baths
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
- Enamelled baths
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Repair or replace in Bolham?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
What you get with us
- Honest advice, even when it means no job
- Normally one visit, start to finish
- Work done at your home or business
- Everything repaired in place
Read our pricing.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Common problems we fix in Bolham
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Bolham contact us include:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Questions to ask before you book
- What the guarantee covers, and for how long
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- How soon you can use it again
Our work in Bolham
Bolham is about 1 mile north of Retford, in Nottinghamshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 329 towns and villages across Nottinghamshire. Our nearest city page is Leeds, about 41 miles away.
Our visits in DN22 are booked in the same way as anywhere else. From Smeath Lane and Bolham Way or anywhere nearby, a technician can come to you. If you’re just outside Bolham, we cover Tiln (1 mile north-west), Retford (1 mile south), Welham (1 mile south-east), Clarborough (1 mile east) and Hayton (2 miles north-east). Larger places within reach include Worksop (8 miles west), Shirebrook (15 miles south-west), Market Warsop (13 miles south-west), New Ollerton (9 miles south), Kilton (7 miles west) and Creswell (13 miles south-west).
Around Bolham
We visit homes around Carr Hill Primary and Nursery School, Queens Head Public House and The Elizabethan Academy and the streets around them. For rail, the closest station is Retford station, roughly 1.7 miles south of the centre. Nearby you’ll also find Grove Castle Hill (2.4 miles south-east) and Rampton Secure Hospital (5.3 miles south-east). Not far away are Bellmoor Lake and Idle Valley Nature Reserve.
Also near Bolham
Other services in Bolham
About our accreditations · Every repair comes with a one-year guarantee.
