Suffolk · England

Non-Slip Bath Coating for Boyland Common homes

Non-slip bath coating in Boyland Common without the cost of replacing. Get a fixed price from your pictures, then book a visit.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Boyland Common

When to call us in Boyland Common

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Customers normally contact us about:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Comparing quotes

  • Whether there are any call-out or travel charges
  • What happens if the damage is worse than the photos show
  • What the guarantee covers, and for how long
  • When it can be used again

Choosing a repair company

How we handle non-slip bath coating in Boyland Common

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We regularly repair acrylic baths, shower trays and enamelled baths, and the jobs we see most are safety for older or less mobile people and resurfaced baths that are now too smooth.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Where
Boyland Common (IP22)
County
Suffolk
Guarantee
A year, on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What a repair cannot fix

In fairness, there are a few things a repair will not fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)

Landlord and trade work in Boyland Common

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.

Why book with us

  • A year’s guarantee on all work
  • Most jobs done in one visit
  • Everything repaired in place
  • CHAS and Constructionline accredited

See our full price list.

The process

On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, usually overnight.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Tell us about parking, stairs or access
  • Have somewhere for us to park nearby if possible

How to get a price

For a price in Boyland Common, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Send photos for a quote

Read more

What non-slip bath coating costs

Every quote is fixed and free. What we take into account:

  • Previous DIY repairs that have to come out
  • Access to the area
  • The size and number of damaged areas
  • Unusual colours or finishes

Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Quotes from your pictures

We price nearly every job from pictures. This is what to send:

  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area
  • A wider photo showing the whole bath or shower tray

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Where we work around Boyland Common

Boyland Common is about 4 miles north-west of Diss, in Suffolk. Wherever you are in the IP22 postcode area, we carry out the work at your property. Boyland Common is one of 731 towns and villages in Suffolk where we work. We work right across the region, from Boyland Common to London (about 80 miles away).

Postcode districts we cover here: IP22. From Wood Lane and Mission Way or anywhere nearby, a technician can come to you. If you’re just outside Boyland Common, we cover Fersfield Common (1 mile north-west), Fersfield (1 mile south-west), Shelfanger (2 miles east), Winfarthing (2 miles north-east) and Banham (3 miles north). We also work in nearby towns such as Stowmarket (15 miles south), Diss (4 miles south-east), Chilton (15 miles south), Thurston (15 miles south-west), Elmswell (13 miles south-west) and Woolpit (14 miles south-west).

Landmarks near Boyland Common

Locally, our jobs take us to homes close to Church of St Andrew, among other places. Boyland Common’s nearest station is Diss station, about 4 miles south-east. Nearby you’ll also find Buckenham Castle (4.3 miles north) and Bressingham Steam and Gardens (1.8 miles south). Open spaces near Boyland Common include Redgrave and Lopham Fen.

Map of Boyland Common © OpenStreetMap contributors

FAQs for Boyland Common

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

What if the damage is worse than the photos show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

How do I get a price for non-slip bath coating in Boyland Common?

We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your IP22 postcode.

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Can you repair several things at once?

Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.