Cornwall · England

Non-slip bath & shower coating in Boyton, Cornwall

We travel to Boyton for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Boyton

About our non-slip bath coating in Boyton

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you are dealing with worn-out textured areas and bath mats that harbour mould or get forgotten, we can usually put it right, on enamelled baths, wet room floors (ask us) and resurfaced baths alike.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Boyton (PL15)
Region
Cornwall
Cover
A year, on every repair
Quote
Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

Boyton questions

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

How much does non-slip bath coating cost in Boyton?

We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your PL15 postcode.

Can you redo someone else’s repair?

Typically, yes. We remove the old repair before doing a new one, so let us know about it.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we will take it from there.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Can I add another job to the visit?

Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.

Why repair rather than replace?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why book with us

  • Rooms protected and left tidy
  • Generally one visit, start to finish
  • Straight answers about what a repair can do
  • No need to remove anything

See our full price list.

Boyton and the surrounding area

Boyton is about 15 miles north-west of Tavistock, in Cornwall. Anywhere in PL15, a technician comes to you. We work in all 644 towns and villages across Cornwall.

We cover every part of the PL15 postcode area and the streets around it. Close by, we cover Ladycross (2 miles south), Werrington (3 miles south), St Giles on the Heath (3 miles east), Yeolmbridge (3 miles south) and North Petherwin (3 miles south-west). Within a short drive, we also cover Launceston (5 miles south), Bude (11 miles north-west), Callington (14 miles south), Newport (4 miles south), Flexbury (11 miles north-west) and Camelford (14 miles south-west).

Landmarks near Boyton

Typical jobs here are in homes near Church of the Holy Name and Boyton Community Primary School. Nearby you will also find Launceston Castle (4.7 miles south).

Map of Boyton © OpenStreetMap contributors

What we are called out for in Boyton

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Get in touch if you’ve noticed:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

Before you book anyone

  • Is the price fixed, and does it include VAT?
  • What prep work is covered
  • What protection goes down before work starts
  • Who turns up on the day

Choosing a repair company

How it works

We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes a morning or an afternoon, and we will tell you if anything changes.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, usually overnight.

Getting ready for the visit

  • Let us know which floor the room is on
  • Clear toiletries, mats and anything else from around the area
  • Tell us about parking, stairs or access

Ask for a price

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a fixed price

Related advice

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

Prices and what affects them

Quotes are free and the price is fixed. What we look at:

  • What kind of damage it is
  • How easy the damage is to reach
  • Unusual colours or finishes
  • Whether we combine several jobs

We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your pictures

Before you send photos, these tips help us give you a firm price:

  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • Good light, ideally daylight, without flash glare
  • A wider photo showing the whole bath or shower tray

For a price in Boyton, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

What we cannot put right

We’d rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays

Work for landlords and builders

We work for landlords, letting agents and housing providers in Boyton as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.