Aberdeenshire · Scotland

Non-slip bath & shower coating in Bridge of Alford, Aberdeenshire

We travel to Bridge of Alford for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Bridge of Alford

How we handle non-slip bath coating in Bridge of Alford

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We work on resurfaced baths, acrylic baths and enamelled baths, and people most often call us about resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Location
Bridge of Alford (AB33)
County
Aberdeenshire
Warranty
12 months on all our work
Price
Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why book with us

  • Straight answers about what a repair can do
  • Free fixed quotes from pictures
  • We come to you, anywhere in the UK
  • CHAS and Constructionline accredited

Take a look at our pricing.

Landlords, agents and businesses in Bridge of Alford

We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.

We work for landlords, letting agents and housing providers in Bridge of Alford as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

Honest limits

Not everything can be repaired, and we would rather say so up front. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before booking.

Surfaces we repair

  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Shower trays
  • Enamelled baths

Bridge of Alford: your questions answered

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

How do I get a price for non-slip bath coating in Bridge of Alford?

Because every job differs, we price from pictures. You’ll get a fixed figure before booking.

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Common problems we fix in Bridge of Alford

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Look out for any of the following:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Comparing quotes

  • How the colour is matched
  • How long it needs to cure
  • How to care for the finish
  • How the room is protected while they work

10 questions to ask before booking

How the visit works

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, generally overnight.

Preparing for the visit

  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access
  • Keep children and pets away from the room on the day

Getting a price

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Get a free quote

Related advice

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Where we work around Bridge of Alford

Bridge of Alford is about 13 miles west of Inverurie, in Aberdeenshire. Whether you’re in the middle of Bridge of Alford or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 161 towns and villages in Aberdeenshire, from the larger towns to small villages.

All of AB33 is within our area. From Suie Road and Waterside Gardens or a nearby road, we can come to you. Other places close to Bridge of Alford include Forbes (1 mile south), Tullynessle (1 mile north-west), Alford (1 mile south-east), Kirkton of Tough (5 miles south-east) and Auchleven (5 miles north-east). Further out, we also cover Inverurie (13 miles east), Huntly (14 miles north), Garioch (13 miles east), Kemnay (10 miles east), Kintore (14 miles east) and Aboyne (12 miles south).

What’s near Bridge of Alford

Locally, our jobs take us to homes close to Alford Academy and Tullynessle and Forbes Parish Church, among other places. Further afield, we also cover the area around Grampian Transport Museum (1.4 miles south-east) and Asloun Castle (2.4 miles south-west). Green spaces nearby include Coiliochbar Hill.

Map of Bridge of Alford © OpenStreetMap contributors

Prices and what affects them

Prices are worked out job by job. The main factors are:

  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas
  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

A couple of clear pictures is all it takes. It helps if you send:

  • Where you are, by postcode
  • A picture taken from further back
  • What it’s made of, if you know
  • Any earlier repairs or coatings

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.