Oxfordshire · England

Non-Slip Bath Coating in Brighthampton

We travel to Brighthampton for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Brighthampton homes

About our non-slip bath coating in Brighthampton

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. We are often asked to fix a bath or tray that is slippery when wet and worn-out textured areas, in wet room floors (ask us), resurfaced baths and acrylic baths.

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Brighthampton (OX29)
County
Oxfordshire
Guarantee
A year, on every repair
Price
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

When to call us in Brighthampton

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Send us a photo if you notice any of these:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

Before you book anyone

  • A fixed quote, and whether VAT is included
  • How the room is protected while they work
  • Aftercare advice
  • How long the guarantee is and what it covers

How to compare quotes

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

What we can’t put right

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)

Covering Brighthampton

Brighthampton is about 4 miles south-east of Witney, in Oxfordshire. Across the OX29 area, we carry out the work at your property. Brighthampton is one of 443 towns and villages in Oxfordshire we cover. Our jobs stretch from Brighthampton to Birmingham (about 55 miles away).

Jobs in OX29 work the same way as everywhere else we cover. From Aston Road, Abingdon Road and Malthouse Lane or anywhere nearby, a technician can come to you. Other places close to Brighthampton include Standlake (1 mile east), Hardwick (2 miles north), Stanton Harcourt (2 miles north-east), Ducklington (3 miles north-west) and South Leigh (3 miles north). Further out, we also cover Oxford (9 miles east), Didcot (12 miles south-east), Abingdon-on-Thames (8 miles south-east), Witney (4 miles north-west), Carterton (7 miles north-west) and Wantage (10 miles south).

Around Brighthampton

We visit homes around St Giles' Church, Standlake Church of England Primary School and Mulberry Bush School, among other places. Further afield, we also cover the area around Hinton Waldrist Castle (2.8 miles south). Open spaces near Brighthampton include Hitchcopse Pit.

Map of Brighthampton © OpenStreetMap contributors

Brighthampton questions

Do you cover the entire of Oxfordshire?

Across the UK. Our prices are the same everywhere.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Can I get a quote without a visit?

Usually, yes. Clear photos let us give you a fixed quote without visiting.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Prices and what affects them

A fixed quote means you know the cost before booking. We look at:

  • The type of damage
  • How much damage there is
  • Previous DIY repairs that have to come out
  • The colour and finish to match

The price reflects the work involved, not your postcode. You’ll see the full price before you book.

Getting a price from photos

Almost every job we do is priced from pictures. This is what we need:

  • The material, if you know it
  • Your postcode, so we can check dates
  • One sharp close-up of the damage
  • Any earlier repairs or coatings

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.

For landlords and businesses

Landlords, letting agents and housing providers in Brighthampton use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

How it works

Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, usually overnight.

How to prepare

  • Have a window or extractor fan available
  • Let the surface dry out before the visit
  • Tell us if there are stairs or a lift

How to get a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Get a fixed price

Related advice

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Why book with us

  • No need to remove anything
  • Accredited with CHAS, Constructionline and SafeContractor
  • Typically one visit, start to finish
  • Work done at your home or business

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.