Hampshire · England
Non-Slip Bath Coating in Brockenhurst
We travel to Brockenhurst for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Non-slip bath coating in Brockenhurst, done in place
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. We work on enamelled baths, acrylic baths and resurfaced baths, and common reasons people get in touch are resurfaced baths that are now too smooth and safety for older or less mobile people.
You get a one-year guarantee, the same in Brockenhurst as everywhere else we work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Brockenhurst (SO42)
- County
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why us?
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
Take a look at our full price list.
Covering Brockenhurst
Brockenhurst is about 5 miles north of Lymington, in Hampshire. Wherever you are in the SO42 postcode area, a technician comes to you. Brockenhurst is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Brockenhurst to London (about 80 miles away).
We cover every part of SO42. From Fibbards Road, The Rise and Brookley Road or anywhere nearby, a technician can come to you. Close by, we cover South Weirs (1 mile south-west), Setley (1 mile south), Balmerlawn (1 mile north-east), Lyndhurst (4 miles north) and Emery Down (4 miles north). We also work in nearby towns such as Eastleigh (14 miles north-east), Totton (8 miles north-east), Chandler's Ford (14 miles north-east), Hedge End (14 miles north-east), Lymington (5 miles south) and Romsey (13 miles north).
Near you in Brockenhurst
We visit homes around Church of St Saviour, Brockenhurst Church of England Primary School and Morant Arms and the streets around them. Brockenhurst has its own railway station: Brockenhurst station. Other landmarks nearby include Lymington New Forest Hospital (3.8 miles south).
Nearby places to Brockenhurst
Other services in Brockenhurst
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Questions from Brockenhurst
Do you cover Brockenhurst?
We do. Technicians travel to Brockenhurst from across the region, with no extra charge for travel.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What does non-slip bath coating cost?
Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will I see the coating?
Very little: the treated area looks slightly matt.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
The process
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a few hours. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Getting ready for the visit
- Open a window if you can
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Prices and what affects them
We price every job individually, from your photos. What matters most is:
- How many items we do on one visit
- The type of damage
- How hard the colour is to match
- What the surface is made of
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what helps:
- The material, if you know it
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- A close-up of the damage, in focus
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Landlord and trade work in Brockenhurst
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Brockenhurst, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Do you need non-slip bath coating in Brockenhurst?
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Contact us if you’ve noticed any of these:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Comparing quotes
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- The length of the guarantee and what it covers
When a repair is not the answer
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly.
Materials we repair
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Resurfaced baths
About our accreditations · Every repair comes with a one-year guarantee.
