Pembrokeshire · Wales

Non-slip bath & shower coating in Broom, Pembrokeshire

Non-slip bath coating across Broom and nearby, generally in one visit.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Broom homes

Non-slip bath coating in Broom, done in place

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our technicians work on acrylic baths, enamelled baths and resurfaced baths, and the jobs we see most are a bath or tray that is slippery when wet and safety for older or less mobile people.

Whatever the size of the job, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Broom (SA68)
Region
Pembrokeshire
Warranty
One year on every repair
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Landlord and trade work in Broom

Landlords, letting agents and housing providers in Broom use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Where we work around Broom

Broom is about 11 miles east of Haverfordwest, in Pembrokeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 223 places across Pembrokeshire.

Our visits in SA68 work the same way as everywhere else we cover. Nearby, we also work in Begeli (1 mile south-east), Cilgeti (1 mile south-east), Kingsmoor (1 mile south-east), Hill (1 mile south-east) and Pentlepoir (1 mile south). We also work in nearby towns such as Haverfordwest (11 miles west), Milford Haven (13 miles west), Pembroke (9 miles south-west), Pembroke Dock (9 miles west), The Marsh (11 miles north-west) and Dinbych-y-Pysgod (5 miles south).

Near you in Broom

We visit homes around Begelly Arms and Church Of St. Mary, among other places. For rail, the closest station is Kilgetty station, about 1.2 miles south-east of the centre. Further afield, we also cover the area around Narberth Museum (3.9 miles north) and Castle Ring (0.7 miles south-east). Not far away are Pentlepoir Hill.

Map of Broom © OpenStreetMap contributors

How the visit works

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for a morning or an afternoon from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing
  • Plan for the room to be out of bounds to pets and children

Getting a price

For a price in Broom, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Send pictures for a quote

Read more

What we are called out for in Broom

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Typical reasons for a call-out include:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

What to look for in a quote

  • How the colour is matched
  • If travel is included in the price
  • How soon you can use it again
  • What prep work is covered

10 questions to ask before you book

Prices and what affects them

Quotes are free and the price is fixed. What we take into account:

  • How many items we do on one visit
  • How much damage there is
  • How easy the damage is to reach
  • The material

Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Quotes from your pictures

Photographing the damage takes a minute. Try to send:

  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage
  • Natural light rather than flash
  • A picture taken from further back

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them to us. You will get a fixed price, not an estimate.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for Broom. The job itself decides the price: the material, the amount of damage and how many items.

Why Broom customers choose us

  • A year’s guarantee on all work
  • No need to remove anything
  • CHAS and Constructionline accredited
  • We will tell you if it’s not worth repairing

See our prices page.

What we can’t put right

A repair isn’t right for every job, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths

FAQs for Broom

What if the damage is worse than the pictures show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.

What do you need from me?

Just photos, your postcode and a contact number. On the day, access to the room.

What areas do you cover?

The whole UK, including all of Pembrokeshire. Just include your postcode and we will offer you dates.

Do you work in Broom?

Yes, we do. We send a technician to Broom for every job, with no extra charge for travel.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.