Vale of Glamorgan · Wales
Non-slip bath & shower coating in Broughton, Vale of Glamorgan
We travel to Broughton for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Our work in Broughton
Broughton is about 6 miles south of Bridgend, in the Vale of Glamorgan. Anywhere in CF71, a technician comes to you. Broughton is one of 67 towns and villages in the Vale of Glamorgan we cover.
All of CF71 is covered, from the main roads to the quietest streets. We regularly work on streets such as West Street and Chapel Road. Neighbouring places we cover include Tre-pit (1 mile north-west), Wick (1 mile north), Marcroes (1 mile south), Clemenstone (2 miles north) and Llandw (2 miles north-east). Further out, we also cover Barry (12 miles east), Gibbonsdown (12 miles east), Cadoxton (13 miles east), Dinas Powys (15 miles east), Llantwit Major (3 miles south-east) and Cowbridge (5 miles north-east).
Around Broughton
We visit homes around Wick Marcross C.I.W. Primary School, The Plough and Harrow pub and St Mary's Church and the streets around them. For rail, the closest station is Llantwit Major station, about 3.4 miles south-east of the centre. Further afield, we also cover the area around Llandow Castle (1.7 miles north-east) and Llandow/Ewenny (2.9 miles north-east). Open spaces near Broughton include Wick Hill.
About our non-slip bath coating in Broughton
It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. If you are dealing with resurfaced baths that are now too smooth and safety for older or less mobile people, we can help, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Broughton (CF71)
- County
- Vale of Glamorgan
- Warranty
- 12 months on all our work
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Broughton
Other services in Broughton
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Broughton: your questions answered
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you come to Broughton?
Yes. We cover the whole UK and travel to Broughton. Send photos and we will quote, or call 0345 017 0787.
What happens once I’ve sent photos?
You’ll get a fixed quote back, usually with dates to choose from. You’re under no obligation.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send pictures.
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Why choose Surface Doctor in Broughton
- One visit for most repairs
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- A year’s guarantee on all work
See our prices page.
The process
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, usually overnight.
Before we arrive
- Make sure the room can be ventilated
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
What non-slip bath coating costs
A fixed quote means you know the cost before booking. We look at:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- How hard the colour is to match
- How many areas need work
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Your postcode, so we can check dates
- Natural light rather than flash
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
What we’re called out for in Broughton
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Most people contact us when they notice something like this:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Comparing quotes
- Whether a trained technician does the job
- What preparation is included
- How the colour is matched
- Whether the price covers travel
What we can’t put right
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Enamelled baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
