Lancashire · England
Non-Slip Bath Coating for Brunshaw homes
Clear non-slip coatings for baths and shower trays in Brunshaw, carried out at your home and guaranteed for a year.
- Safety for older or less mobile people
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Non-slip bath coating in Brunshaw, done in place
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include bath mats that harbour mould or get forgotten and worn-out textured areas, across resurfaced baths, shower trays and acrylic baths.
Every repair comes with our one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Brunshaw (BB10, BB11)
- Area hub
- Lancashire
- Warranty
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Brunshaw
What else we do in Brunshaw
About Brunshaw
Brunshaw is about 1 mile east of Burnley, in Lancashire. From the centre of Brunshaw to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Brunshaw is one of 482 towns and villages in Lancashire where we work. You can also see our page for Manchester, about 22 miles away.
Jobs in BB10 and BB11 work the same way as everywhere else we cover. Jobs here include addresses on Ridge Avenue, Mayfair Road and Brunshaw Road. Neighbouring places we cover include Burnley Wood (1 mile south-west), Burnley (1 mile west), Stoneyholme (1 mile north-west), Rose Grove (3 miles west) and Habergham (3 miles west). We also work in nearby towns such as Accrington (6 miles south-west), Nelson (3 miles north), Rawtenstall (7 miles south-west), Colne (5 miles north), Clitheroe (9 miles north-west) and Haslingden (8 miles south-west).
What’s near Brunshaw
Locally, our jobs take us to homes close to Visions Learning Trust, Unity College and Burnley Brunshaw Primary School and the streets around them. You will also find Queens Park (0.7 miles north-west), Church of St Stephen (0.7 miles south-west) and Park View pub (0.5 miles west). Brunshaw’s nearest station is Burnley Central station, roughly 1.2 miles west of the centre. A little further out are Burnley General Hospital (1.4 miles north) and Museum of Local Crafts And Industries (1 mile south). Open spaces near Brunshaw include Rowley Lake and Towneley Castle Hill.
When we’d advise against a repair
It helps to know what we can’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
Landlords, letting agents and housing providers in Brunshaw use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Common problems we fix in Brunshaw
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Clients typically contact us about:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
What your quote should include
- When it can be used again
- Whether a trained technician does the job
- What happens if they find more damage
- Aftercare advice
Your questions about non-slip bath coating in Brunshaw
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Which areas do you work in?
We work UK-wide, so Brunshaw is covered. Our prices are the same everywhere.
Do the materials smell?
There may be a mild smell during the work.
Can you quote from photos?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Prices and what affects them
There’s no area surcharge for Brunshaw. What changes the price is:
- How many areas need work
- Access to the area
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- A photo taken from further back
- A clear, close picture of the problem area
- Details of any past repairs
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will say right away whether it can be repaired.
Repairing versus replacing in Brunshaw
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why Brunshaw customers choose us
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- We leave the room as we found it
Read our pricing.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, usually overnight.
Getting ready for the visit
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
