Wrexham · Wales

Non-slip bath & shower coating in Brynteg, Wrexham

Non-slip bath coating in Brynteg without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Brynteg

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Non-slip bath coating at your home in Brynteg

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We regularly repair acrylic baths, resurfaced baths and shower trays, and common reasons people get in touch are safety for older or less mobile people and worn-out textured areas.

Every job is backed for twelve months in Brynteg and everywhere else. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Area
Brynteg (LL11)
County
Wrexham
Warranty
One year on every repair
Quotes
Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

There are no hourly rates or hidden extras. The price is based on:

  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes
  • Doing more than one item at once
  • The type of damage

What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.

How to get a fixed quote

Almost every job we do is priced from pictures. This is what to send:

  • Daylight if possible, and no flash reflection
  • A wider photo showing the whole bath or shower tray
  • Any details about the material
  • The postcode, so we can plan the visit

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.

Landlords, agents and businesses in Brynteg

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why book with us

  • We’ll tell you if it’s not worth repairing
  • Rooms protected and left tidy
  • A year’s guarantee on all work
  • No need to remove anything

See our full price list.

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths

What happens on the day

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a morning or an afternoon, and you’re welcome to carry on with your day while we work.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing
  • Open a window if you can

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a fixed price

Advice

When to call us in Brynteg

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

These are the problems we’re asked about most:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas

Questions to ask before booking

  • Whether a trained technician does the job
  • How long the guarantee is and what it covers
  • How the room is protected while they work
  • What happens if the damage is worse than the photos show

10 questions to ask before you book

Brynteg questions

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

Which areas do you work in?

We work UK-wide, and that includes Brynteg. Our prices are the same everywhere.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

How do I get a price for non-slip bath coating in Brynteg?

We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item with your LL11 postcode.

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What happens if you find more damage?

The price is fixed for what the pictures show. If there is more, we will tell you before starting.

Our work in Brynteg

Brynteg is about 2 miles north-west of Wrexham, in Wrexham. Whether you are in the middle of Brynteg or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Brynteg is one of 115 towns and villages in Wrexham we cover. You can also see our page for Liverpool, about 24 miles away.

Jobs in LL11 are booked in the same way as anywhere else. You will find streets such as High Street, Rockwood Road and Maesteg. Main roads around Brynteg include the B5433, so getting to you is simple. We also cover the places around Brynteg: Pentre Broughton (1 mile north), Southsea (1 mile south-west), Highfield (1 mile east), Little Mountain (1 mile north-east) and Tanyfron (1 mile west). Further out, we also cover Caia Park (3 miles south-east), Rhosllannerchrugog (4 miles south), The Dunks (3 miles south-east), Hightown (3 miles south-east), Pentredŵr (4 miles south) and Llay (3 miles north-east).

Around Brynteg

We visit homes around Ysgol Bryn Alyn, Nant Mill and Ysgol Bryn Alyn, among other places. Other local landmarks include Brynteg County School (under half a mile west), Church of St Peter (under half a mile east) and The Brynteg Inn (less than half a mile south). The closest station to Brynteg is Gwersyllt station, roughly 0.9 miles north-east. Further afield, we also cover the area around Bersham Ironworks and Heritage Centre (2 miles south) and Wrexham Maelor Hospital (1.6 miles south-east). Green spaces nearby include Cefn and Brymbo Pool.

Map of Brynteg © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.