Bristol · England

Non-slip bath & shower coating in Bullock's Park, Bristol

Non-slip bath coating across Bullock's Park and nearby, typically in one visit and guaranteed for a year.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Bullock's Park

About our non-slip bath coating in Bullock's Park

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Typical jobs include resurfaced baths that are now too smooth and worn-out textured areas, in enamelled baths, acrylic baths and resurfaced baths.

You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Bullock's Park (BS1, BS8, BS2)
County
Bristol
Warranty
A year, on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What we cannot put right

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why Bullock's Park clients choose us

  • Repair technicians who travel to you, UK-wide
  • Every repair guaranteed for a year
  • We leave the room as we found it
  • CHAS and Constructionline accredited

See our pricing.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

FAQs for Bullock's Park

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

How much does non-slip bath coating cost in Bullock's Park?

We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your BS1 postcode.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Which areas do you work in?

The entire UK, including all of Bristol. Just include your postcode and we will confirm dates.

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

How it works

Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. Allow a morning or an afternoon, and we’ll tell you if anything changes.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, generally overnight.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let us know about parking or access
  • Keep pets and children out of the room while we work

Get a quote

If you are in Bullock's Park and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send photos for a quote

Related advice

Signs you need non-slip bath coating in Bullock's Park

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Customers typically contact us about:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

What to look for in a quote

  • How changes to the job are handled
  • How your room will be protected
  • What the guarantee covers, and for how long
  • A fixed price, and whether VAT is included

Our hiring checklist

About Bullock's Park

Bullock's Park is about 1 mile south-west of Bristol, in Bristol. Clients in Bullock's Park get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We cover 89 places in Bristol, from the larger towns to small villages. You can also see our page for Birmingham, about 77 miles away.

All of BS1, BS8 and BS2 is covered, from the main roads to the quietest streets. Local streets include Mark Lane, Pipe Lane and Frog Lane. Bullock's Park is on the A38, so it’s easy for us to reach. Nearby, we also work in Canon's Marsh (1 mile south-east), Spike Island (1 mile south-west), Southville (1 mile south), Hotwells (1 mile west) and Cotham (1 mile north). Within a short drive, we also cover Soundwell (4 miles east), Mayfield Park (4 miles north-east), Horfield (3 miles north), Henleaze (3 miles north), St George (3 miles east) and Hartcliffe (3 miles south).

Near you in Bullock's Park

Our customers here include homes close to North Bristol Post 16 Centre, Mauretania Public House and Bristol Cathedral Choir School and the streets around them. Nearby too are Brandon Hill Park (less than half a mile west), Cathedral Primary School (under half a mile south) and St George's Church (under half a mile north-west). Bullock's Park’s nearest station is Clifton Down station, roughly 0.8 miles north-west of the centre. Other landmarks nearby include Avon (0.9 miles east) and The Galleries (0.6 miles east). Open spaces near Bullock's Park include Brandon Hill and Tarn Lake.

Map of Bullock's Park © OpenStreetMap contributors

How we price non-slip bath coating

We give every job a fixed price from photos. This is what makes a difference:

  • Access to the area
  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • Unusual colours or finishes

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.

Quotes from your photos

We price nearly every job from photos. This is what we need:

  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before
  • A photo taken from further back
  • What it’s made of, if you know

Email us photos of the damage and one of the entire item, and tell us you are in Bullock's Park, and we will reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.