South Lanarkshire · Scotland
Non-slip bath & shower coating in Burnfoot, South Lanarkshire
Non-slip bath coating across Burnfoot and nearby, done in a single visit in most cases and guaranteed for a year.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Burnfoot and nearby
Burnfoot is about 5 miles south-west of Carluke, in South Lanarkshire. Jobs in Burnfoot are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover all 139 towns and villages across South Lanarkshire. You can also see our page for Glasgow, about 19 miles away.
Our visits in ML11 work the same way as everywhere else we cover. Neighbouring places we cover include Auchenheath (1 mile north-east), Kirkmuirhill (1 mile west), Blackwood (1 mile north-west), Dillarburn (2 miles south-east) and Boghead (2 miles south-west). Larger places within reach include East Kilbride (13 miles north-west), Hamilton (9 miles north-west), Cambuslang (14 miles north-west), Uddingston (13 miles north-west), Blantyre (12 miles north-west) and Larkhall (6 miles north-west).
Local landmarks in Burnfoot
In Burnfoot, that means homes near Kirkmuirhill Parish Church and Lesmahagow High School, among other places. For rail, the closest station is Carluke station, roughly 4.9 miles north-east of the centre. Other landmarks nearby include Birkwood Castle (2.4 miles south) and Craignethan Castle (2.2 miles north). The countryside around Burnfoot includes Black Hill.
How we handle non-slip bath coating in Burnfoot
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Whether it’s bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Burnfoot (ML11)
- County
- South Lanarkshire
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Repairing versus replacing in Burnfoot
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Burnfoot. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Most jobs done in one visit
- Everything repaired in place
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
Take a look at our pricing.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
FAQs for Burnfoot
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and let you know when you can use it again.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
Get a quote
For a price in Burnfoot, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
What we’re called out for in Burnfoot
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Get in touch if you’ve noticed any of these:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Before you book anyone
- Who turns up on the day
- Whether the colour is mixed to match
- If travel is included in the price
- How long the guarantee is and what it covers
What non-slip bath coating costs
We charge the same across the UK, including Burnfoot. What changes the price is:
- How much damage there is
- Previous DIY repairs that have to come out
- How many items we do on one visit
- How easy the damage is to reach
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Getting a price from photos
Two or three clear photos are normally enough. Try to include:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Details of any past repairs
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Towns and villages near Burnfoot
More services for Burnfoot
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before you book.
Materials we work on in Burnfoot
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
- Resurfaced baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
