South Lanarkshire · Scotland

Non-slip bath & shower coating in Carluke, South Lanarkshire

Clear non-slip coatings for baths and shower trays for homes and businesses in Carluke and across South Lanarkshire. Free, fixed quotes from your pictures.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Carluke

Repair or replace in Carluke?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why us?

  • Dust sheets down, tidy finish
  • Fixed prices from your photos
  • Accredited with CHAS, Constructionline and SafeContractor
  • We’ll tell you if it’s not worth repairing

Take a look at our full price list.

Non-slip bath coating in Carluke without replacing anything

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Whether it’s worn-out textured areas and a bath or tray that is slippery when wet, we can normally put it right.

Big or small, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Carluke (ML8)
County
South Lanarkshire
Warranty
One year on every repair
Price
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

How we price non-slip bath coating

Quotes are free and the price is fixed. What we look at:

  • Doing more than one item at once
  • Access to the area
  • How many areas need work
  • How hard the colour is to match

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • A wider photo showing the whole bath or shower tray
  • One sharp close-up of the damage
  • What it’s made of, if you know
  • Any earlier repairs or coatings

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Questions from Carluke

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

It’s been repaired before. Can you still fix it?

Typically, yes. We remove the old repair before doing a new one, so let us know about it.

How much does non-slip bath coating cost in Carluke?

Because every job differs, we price from photos. You will get a fixed figure before you book.

Do you come to Carluke?

Yes. We work across the UK and come to Carluke and the rest of South Lanarkshire. Send us pictures for a fixed quote, or call 0345 017 0787.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Signs you need non-slip bath coating in Carluke

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

It’s worth getting a quote if you see:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

What to look for in a quote

  • What preparation is included
  • How the room is protected while they work
  • How changes to the job are handled
  • How long the guarantee is and what it covers

10 questions to ask before booking

Covering Carluke

Carluke is about 7 miles south-east of Motherwell, in South Lanarkshire. Anywhere in ML8, we come to you. Carluke is one of 139 towns and villages in South Lanarkshire we cover. You can also see our page for Glasgow, about 19 miles away.

Here we cover the ML8 postcode area. That includes homes on High Street, Market Place and The Market. Carluke sits on or near the A73 and A721, which makes travel easy. We also cover the places around Carluke: Braidwood (1 mile south), Wildmanbridge (2 miles north-west), Law (2 miles north-west), Crossford (3 miles south-west) and Bogside (3 miles north-west). Larger places within reach include East Kilbride (14 miles west), Hamilton (9 miles west), Cambuslang (13 miles north-west), Uddingston (11 miles north-west), Blantyre (11 miles west) and Larkhall (5 miles west). Carluke is one of the larger places we cover in South Lanarkshire.

Around Carluke

We visit homes around Carluke High School and Carluke. For rail, the closest station is Carluke station, roughly 0.6 miles west of the centre. A little further out are Tower of Hallbar (2.1 miles south) and Law Hospital (2 miles north-west). The countryside around Carluke includes Allanton House lake and Black Hill.

Map of Carluke © OpenStreetMap contributors

How it works

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. The room is left tidy and you will know when it can be used.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, usually overnight.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Point us to the nearest place to park
  • Mention if the room is upstairs or in a flat

Ask for a price

Upload photos of the damage and one of the entire item, with your ML8 postcode, and we’ll reply with a fixed quote.

Get a free quote

Related advice

Landlords, agents and businesses in Carluke

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Enamelled baths
  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.